72V05L15J
| Parameters | |
|---|---|
| Supply Voltage | 3.3V |
| Terminal Pitch | 1.27mm |
| Pin Count | 32 |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Element Configuration | Dual |
| Nominal Supply Current | 75mA |
| Max Supply Current | 75mA |
| Clock Frequency | 40MHz |
| Access Time | 15 ns |
| Organization | 8KX9 |
| Density | 72 kb |
| Standby Current-Max | 0.005A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Asynchronous |
| Word Size | 9b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| Programmable Flags Support | No |
| Output Enable | NO |
| Cycle Time | 25 ns |
| Height Seated (Max) | 3.556mm |
| Length | 13.97mm |
| Width | 11.43mm |
| Thickness | 2.79mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | PLCC |
| Number of Pins | 32 |
| Published | 2009 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 32 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 1 |
72V05L15J Overview
You will find FIFO memory chip in the PLCC package.The recommended mounting method for this FIFO products is Surface Mount .It is possible to achieve high efficiency with a supply voltage of 3.3V .FIFO means contains 32 terminations.There are 32 pins for operation.FIFO design requires 75mA amps of current to operate.When the supply voltage is set to 3.3V , the FIFO's maximum efficiency is achieved.It is designed to run at a minimum temperature of 0°C degrees Celsius to ensure reliability.Its maximum operating temperature of 70°C °C ensures stable operation.A self-contained gadget is contained within FIFOs .A OTHER FIFO type memory IC is present in the FIFO memory chip.If the supply voltage is very low, such as 3V V, FIFO may be able to operate.There is a maximum supply voltage of 3.6V volts that FIFO memory can handle.This FIFO memory IC is equipped with 32 pins in total.The FIFO memory IC is controlled by a clock with a frequency of 40MHz .
72V05L15J Features
FIFOs category
Clock frequency of 40MHz
72V05L15J Applications
There are a lot of Integrated Device Technology (IDT) 72V05L15J FIFOs Memory applications.
- Cardiac Monitoring Device
- Telecommunication
- Video Processing
- Magnetic memories
- High-speed disk
- Application that requires re-writable nonvolatile parameter memory
- Tape controllers
- Event Recorder
- Code converters
- Network bridges
