Parameters |
Factory Lead Time |
1 Week |
Contact Plating |
Lead, Tin |
Mount |
Surface Mount |
Package / Case |
PLCC |
Number of Pins |
32 |
Published |
2005 |
JESD-609 Code |
e0 |
Pbfree Code |
no |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 |
Number of Terminations |
32 |
ECCN Code |
EAR99 |
Terminal Finish |
Tin/Lead (Sn85Pb15) |
Max Operating Temperature |
70°C |
Min Operating Temperature |
0°C |
Subcategory |
FIFOs |
Technology |
CMOS |
Terminal Position |
QUAD |
Terminal Form |
J BEND |
Peak Reflow Temperature (Cel) |
225 |
Number of Functions |
1 |
Supply Voltage |
3.3V |
Terminal Pitch |
1.27mm |
Pin Count |
32 |
Operating Supply Voltage |
3.3V |
Temperature Grade |
COMMERCIAL |
Max Supply Voltage |
3.6V |
Min Supply Voltage |
3V |
Element Configuration |
Dual |
Nominal Supply Current |
75mA |
Max Supply Current |
75mA |
Clock Frequency |
28.5MHz |
Access Time |
25 ns |
Organization |
8KX9 |
Density |
72 kb |
Standby Current-Max |
0.005A |
Parallel/Serial |
PARALLEL |
Sync/Async |
Asynchronous |
Word Size |
9b |
Memory IC Type |
OTHER FIFO |
Bus Directional |
Unidirectional |
Retransmit Capability |
Yes |
FWFT Support |
No |
Output Enable |
NO |
Cycle Time |
35 ns |
Height Seated (Max) |
3.556mm |
Length |
13.97mm |
Width |
11.43mm |
Thickness |
2.79mm |
RoHS Status |
RoHS Compliant |
Lead Free |
Contains Lead |
72V05L25J Overview
FIFO memory chip can be found in the PLCC package.The recommended mounting way is Surface Mount .When the supply voltage is 3.3V , high efficiency is possible.A total of 32 terminations are contained within FIFO means.These are the 32 pins for operation.Its maximum operating current is 75mA .In order to maximize efficiency, the supply voltage should be set to 3.3V .During operation, a minimum temperature of 0°C degrees Celsius should be maintained in order to ensure reliability.The stable operation is enabled by the memory logic's maximum operating temperature of 70°C °C.A self-contained gadget is contained in FIFOs .This part has a memory type of OTHER FIFO .FIFO memory chips may be operated at very low supply voltages, such as 3V volts.FIFO memory can handle a maximum supply voltage of 3.6V V.As a result, it contains a total of 32 pins.FIFO memory ICs run at a frequency of 28.5MHz .
72V05L25J Features
FIFOs category
Clock frequency of 28.5MHz
72V05L25J Applications
There are a lot of Integrated Device Technology (IDT) 72V05L25J FIFOs Memory applications.
- Network switching/routing
- Game Controller
- Test Equipment
- SPD for DDR3 Memory Modules
- IP Camera Buffer
- Medical Monitoring Device
- Industrial Systems
- Down-Hole Energy Drilling
- HDD
- Data communications