72V05L25J8
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | PLCC |
| Number of Pins | 32 |
| Published | 2005 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 32 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 1.27mm |
| Pin Count | 32 |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Element Configuration | Dual |
| Max Supply Current | 75mA |
| Clock Frequency | 28.5MHz |
| Access Time | 25 ns |
| Organization | 8KX9 |
| Standby Current-Max | 0.005A |
| Memory Density | 73728 bit |
| Parallel/Serial | PARALLEL |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| FWFT Support | No |
| Output Enable | NO |
| Cycle Time | 35 ns |
| Height Seated (Max) | 3.556mm |
| Length | 13.97mm |
| Width | 11.43mm |
| Thickness | 2.79mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72V05L25J8 Overview
You can find FIFO memory chip in the PLCC package.A Surface Mount mounting method is recommended.With a supply voltage of 3.3V volts, high efficiency is possible.A total of 32 terminations can be found in FIFO means.The operation pins are 32 pins.For its operation, 75mA is the maximum current required.When the supply voltage is set to 3.3V , the FIFO's maximum efficiency is achieved.The FIFO products must be run at a minimum temperature of 0°C degrees Celsius to ensure reliability.The stable operation is enabled by the memory logic's maximum operating temperature of 70°C °C.The gadget in FIFOs is self-contained.There is a memory type OTHER FIFO in the IC of this part.If the supply voltage is very low, such as 3V V, FIFO may be able to operate.An input voltage of 3.6V V is the maximum that FIFO memory can handle.There are a total of 32 pins on this FIFO memory IC.There is 28.5MHz frequency set for the clock of the FIFO memory IC.
72V05L25J8 Features
FIFOs category
Clock frequency of 28.5MHz
72V05L25J8 Applications
There are a lot of Integrated Device Technology (IDT) 72V05L25J8 FIFOs Memory applications.
- Programmable Logic Controller
- Measurement Equipment
- Game Controller
- Fabrication Site
- Cardiac Monitoring Device
- Battery Charger
- Medical Monitoring Device
- One assembly
- Portable Information Devices
- HDD
