72V05L25JI
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | PLCC |
| Number of Pins | 32 |
| Published | 2005 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 32 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Pin Count | 32 |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | INDUSTRIAL |
| Number of Circuits | 2 |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Memory Size | 9kB |
| Element Configuration | Dual |
| Nominal Supply Current | 75mA |
| Max Supply Current | 75mA |
| Frequency (Max) | 28.5MHz |
| Access Time | 25 ns |
| Data Bus Width | 9b |
| Direction | Bidirectional |
| Organization | 8KX9 |
| Density | 72 kb |
| Standby Current-Max | 0.005A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Asynchronous |
| Word Size | 9b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| FWFT Support | No |
| Output Enable | NO |
| Cycle Time | 35 ns |
| Height Seated (Max) | 3.556mm |
| Length | 13.97mm |
| Width | 11.43mm |
| Thickness | 2.79mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72V05L25JI Overview
You can find FIFO memory chip in package PLCC .Data and applications can be stored in the FIFO chip's 9kB memory.Surface Mount is memory IC's recommended mounting method.A supply voltage of 3.3V is capable of producing high efficiency.FIFO consists of 32 terminations, which indicates that FIFO means is empty.There are 32 pins on the operation pins.FIFO design requires a maximum current of 75mA to operate.The supply voltage should be set to 3.3V in order to achieve FIFO's maximum efficiency.In order to ensure reliability, FIFO is maintained at -40°C degrees Celsius at all times.Keeping the operating temperature at 85°C °C allows the FIFO products to operate continuously.It is contained within FIFOs .ICs of type OTHER FIFO are used in the FIFO memory chip.There is a possibility that FIFO may operate at a very low supply voltage, such as 3V V.There is a maximum supply voltage of 3.6V volts that FIFO memory can handle.The FIFO memory IC is equipped with a total of 32 pins.During normal operation, the FIFO memory's maximum value is 28.5MHz .By using 2 circuits, FIFO memory chip has greater flexibility.
72V05L25JI Features
9kB memory size
FIFOs category
Frequency at most
72V05L25JI Applications
There are a lot of Integrated Device Technology (IDT) 72V05L25JI FIFOs Memory applications.
- Down-Hole Energy Drilling
- SPI Bus Flash Memory Devices
- Programmable Logic Controller
- Multi-stage synchronizer
- SPI Bus Flash Memory Device
- Cameras
- Emulators
- Network switching/routing
- Fabrication Site
- Code converters
