72V05L25JI8
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | PLCC |
| Number of Pins | 32 |
| Published | 2005 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 32 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 1.27mm |
| Pin Count | 32 |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Element Configuration | Dual |
| Nominal Supply Current | 75mA |
| Max Supply Current | 75mA |
| Clock Frequency | 28.5MHz |
| Access Time | 25 ns |
| Organization | 8KX9 |
| Density | 72 kb |
| Standby Current-Max | 0.005A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Asynchronous |
| Word Size | 9b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| FWFT Support | No |
| Output Enable | NO |
| Cycle Time | 35 ns |
| Height Seated (Max) | 3.556mm |
| Length | 13.97mm |
| Width | 11.43mm |
| Thickness | 2.79mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72V05L25JI8 Overview
This package is included in PLCC .Mounting it Surface Mount is recommended.A supply voltage of 3.3V allows for high efficiency.A total of 32 terminations can be found in FIFO means.The operation pins are 32 pins.In order to operate it, it requires 75mA volts of current.Set the supply voltage to 3.3V to ensure FIFO's maximum efficiency.FIFO operates at a minimum temperature of -40°C degrees Celsius to ensure reliabilFIFOy.A memory logic's maximum operating temperature of 85°C degrees Celsius assures stable operation.The gadget in FIFOs is self-contained.The IC of the part is of the type OTHER FIFO .Typically, FIFO would work at 3V volts, but it may also work at higher voltages.A maximum voltage of 3.6V volts can be applied to FIFO memory.The FIFO memory IC has a total of 32 pins.This FIFO memory IC has a clock frequency of 28.5MHz .
72V05L25JI8 Features
FIFOs category
Clock frequency of 28.5MHz
72V05L25JI8 Applications
There are a lot of Integrated Device Technology (IDT) 72V05L25JI8 FIFOs Memory applications.
- Network switching/routing
- SPI Bus Flash Memory Devices
- Tape controllers
- Measurement Equipment
- Alarm System
- SPI Bus Flash Memory Device
- Portable Information Devices
- One assembly
- Game Controller
- Consumer
