72V05L35J
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | PLCC |
| Number of Pins | 32 |
| Published | 2009 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 32 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 1.27mm |
| Pin Count | 32 |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Element Configuration | Dual |
| Nominal Supply Current | 75mA |
| Max Supply Current | 75mA |
| Clock Frequency | 22.2MHz |
| Access Time | 35 ns |
| Organization | 8KX9 |
| Density | 72 kb |
| Standby Current-Max | 0.005A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Asynchronous |
| Word Size | 9b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| FWFT Support | No |
| Output Enable | NO |
| Cycle Time | 45 ns |
| Height Seated (Max) | 3.556mm |
| Length | 13.97mm |
| Width | 11.43mm |
| Thickness | 2.79mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72V05L35J Overview
FIFO memory chip can be found in the PLCC package.Mounting it in the Surface Mount way is recommended.With a supply voltage of 3.3V volts, high efficiency is possible.A total of 32 terminations are contained within FIFO means.FIFO design has 32 operation pins.There is a maximum current requirement of 75mA for its operation.In order to maximize efficiency, the supply voltage should be set to 3.3V .Keeping the temperature at 0°C degrees Celsius ensures its reliability.An operating temperature of 70°C °C is necessary for stable operation.The gadget is self-contained and can be found in FIFOs .The IC of the part is OTHER FIFO memory type.Low supply voltages, such as 3V V, may be required for operation.A maximum voltage of 3.6V volts can be applied to FIFO memory.It has a total of 32 pins on it.The FIFO memory IC runs at a frequency of 22.2MHz .
72V05L35J Features
FIFOs category
Clock frequency of 22.2MHz
72V05L35J Applications
There are a lot of Integrated Device Technology (IDT) 72V05L35J FIFOs Memory applications.
- Digital buffering
- Controlled baseline
- Communications
- Computer networks
- Data-acquisition systems
- Smart Meter
- Test Equipment
- Notebook
- Networking
- GPS Offender Tracking
