72V05L35J8
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | PLCC |
| Number of Pins | 32 |
| Packaging | Tape & Reel |
| Published | 2009 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 32 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 1.27mm |
| Pin Count | 32 |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Element Configuration | Dual |
| Nominal Supply Current | 75mA |
| Max Supply Current | 75mA |
| Clock Frequency | 22.2MHz |
| Access Time | 35 ns |
| Organization | 8KX9 |
| Density | 72 kb |
| Standby Current-Max | 0.005A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Asynchronous |
| Word Size | 9b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| FWFT Support | No |
| Output Enable | NO |
| Cycle Time | 45 ns |
| Height Seated (Max) | 3.556mm |
| Length | 13.97mm |
| Width | 11.43mm |
| Thickness | 2.79mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72V05L35J8 Overview
PLCC is a package that contains FIFO memory chip.The package comes in a case of Tape & Reel .Surface Mount is memory IC's recommended mounting method.When the supply voltage is 3.3V , high efficiency is possible.A total of 32 terminations are contained within FIFO means.There are 32 pins for operation.For its operation, 75mA is the maximum current required.A voltage of 3.3V should be used for FIFO's maximum efficiency.It operates at 0°C degrees Celsius to ensure reliability.A memory logic's maximum operating temperature of 70°C degrees Celsius assures stable operation.The gadget in FIFOs is self-contained.This part has a memory type of OTHER FIFO .FIFO may operate at very low supply voltages, such as 3V volts.There is a maximum supply voltage of 3.6V volts that FIFO memory can handle.There are a total of 32 pins on this FIFO memory IC.This FIFO memory IC has a clock frequency of 22.2MHz .
72V05L35J8 Features
FIFOs category
Clock frequency of 22.2MHz
72V05L35J8 Applications
There are a lot of Integrated Device Technology (IDT) 72V05L35J8 FIFOs Memory applications.
- TVs
- Cameras
- MP3 Interface for Automobile
- Network switching/routing
- Firmware loaders
- Laser Receiver System
- Magnetic memories
- Consumer Systems
- General Data Collection Applications at Extreme High-Temperatures
- Controlled baseline
