72V06L15J
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | PLCC |
| Number of Pins | 32 |
| Published | 2009 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 32 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 1.27mm |
| Pin Count | 32 |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Element Configuration | Dual |
| Nominal Supply Current | 75mA |
| Max Supply Current | 75mA |
| Clock Frequency | 40MHz |
| Access Time | 15 ns |
| Organization | 16KX9 |
| Density | 144 kb |
| Standby Current-Max | 0.005A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Asynchronous |
| Word Size | 9b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| FWFT Support | No |
| Output Enable | NO |
| Cycle Time | 25 ns |
| Height Seated (Max) | 3.556mm |
| Length | 13.97mm |
| Width | 11.43mm |
| Thickness | 2.79mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72V06L15J Overview
You will find FIFO memory chip in the PLCC package.It is recommended that memory IC be mounted in the Surface Mount direction.A supply voltage of 3.3V allows for high efficiency.As a result of this, FIFO means contains 32 terminations.As far as the operation pins are concerned, they are 32 pins.FIFO requires a minimum of 75mA current to operate.FIFO is recommended that the supply voltage be set to 3.3V in order to maximize efficiency.The FIFO products must be run at a minimum temperature of 0°C degrees Celsius to ensure reliability.An operating temperature of 70°C °C is necessary for stable operation.This gadget is self-contained in?FIFOs .A OTHER FIFO memory type IC is used in the part.It is possible to operate the FIFO memory chip at very low supply voltages, such as 3V volts.FIFO memory can handle a maximum supply voltage of 3.6V volts.It consists of a total of 32 pins.The FIFO memory IC is controlled by a clock with a frequency of 40MHz .
72V06L15J Features
FIFOs category
Clock frequency of 40MHz
72V06L15J Applications
There are a lot of Integrated Device Technology (IDT) 72V06L15J FIFOs Memory applications.
- Address mapping
- Emulators
- Networking
- Computer Systems
- Communications
- Computer networks
- Analog-to-digital converters
- Tape controllers
- Industrial Systems
- Queues for communication systems
