72V06L15J8
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | PLCC |
| Number of Pins | 32 |
| Published | 2009 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 32 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 1.27mm |
| Pin Count | 32 |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Element Configuration | Dual |
| Nominal Supply Current | 75mA |
| Max Supply Current | 75mA |
| Clock Frequency | 40MHz |
| Access Time | 15 ns |
| Organization | 16KX9 |
| Density | 144 kb |
| Standby Current-Max | 0.005A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Asynchronous |
| Word Size | 9b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| FWFT Support | No |
| Output Enable | NO |
| Cycle Time | 25 ns |
| Height Seated (Max) | 3.556mm |
| Length | 13.97mm |
| Width | 11.43mm |
| Thickness | 2.79mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72V06L15J8 Overview
FIFO memory chip is contained in the PLCC package.Surface Mount is recommended as the mounting method.When the supply voltage is 3.3V , high efficiency is possible.32 terminations are contained in FIFO means.There are 32 pins on the operation pins.In order to operate it, it requires 75mA volts of current.In order to maximize efficiency, the supply voltage should be set to 3.3V .To ensure reliabilFIFOy, FIFO runs at a minimum working temperature of 0°C degrees Celsius.A memory logic's maximum operating temperature of 70°C degrees Celsius assures stable operation.In FIFOs , there is a self-contained gadget.A OTHER FIFO type memory IC is present in the FIFO memory chip.Low supply voltages, such as 3V V, may be required for operation.This FIFO memory chip can handle maximum supply voltages of 3.6V volts.Approximately 32 pins are attached to it.The FIFO memory IC runs at a frequency of 40MHz .
72V06L15J8 Features
FIFOs category
Clock frequency of 40MHz
72V06L15J8 Applications
There are a lot of Integrated Device Technology (IDT) 72V06L15J8 FIFOs Memory applications.
- Video
- Measurement Equipment
- Product traceability
- Temporary storage elements
- Network bridges
- Analog-to-digital converters
- Emulators
- Look-up Tables
- Extended product life cycle
- Seismic Data Collection at Extreme Temperatures
