72V06L25J
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | PLCC |
| Number of Pins | 32 |
| Published | 2009 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 32 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 1.27mm |
| Pin Count | 32 |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Element Configuration | Dual |
| Nominal Supply Current | 75mA |
| Max Supply Current | 75mA |
| Clock Frequency | 28.5MHz |
| Access Time | 25 ns |
| Organization | 16KX9 |
| Density | 144 kb |
| Standby Current-Max | 0.005A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Asynchronous |
| Word Size | 9b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| Programmable Flags Support | No |
| Output Enable | NO |
| Cycle Time | 35 ns |
| Height Seated (Max) | 3.556mm |
| Length | 13.97mm |
| Width | 11.43mm |
| Thickness | 2.79mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72V06L25J Overview
The PLCC package contains FIFO memory chip.Surface Mount is memory IC's recommended mounting method.With a supply voltage of 3.3V volts, high efficiency is possible.32 terminations are contained in FIFO means.There are 32 pins on the operation pins.In order to operate FIFO design, a maximum current of 75mA is required.Set the supply voltage to 3.3V to ensure FIFO's maximum efficiency.For reliability, FIFO works at a minimum temperature of 0°C degrees Celsius.The memory logic's maximum operating temperature is 70°C °C, which allows for stable operation.It is self-contained in FIFOs .The IC of the part is of the type OTHER FIFO .FIFO may operate at very low supply voltages, such as 3V volts.A maximum supply voltage of 3.6V V can be handled by this FIFO memory chip.A total of 32 pins are present on the FIFO memory IC.FIFO memory ICs run at a frequency of 28.5MHz .
72V06L25J Features
FIFOs category
Clock frequency of 28.5MHz
72V06L25J Applications
There are a lot of Integrated Device Technology (IDT) 72V06L25J FIFOs Memory applications.
- High-speed graphics pixel buffer
- Seismic Data Collection at Extreme Temperatures
- Programmable Logic Controller
- Magnetic memories
- Product traceability
- Transistors
- Cardiac Monitoring Device
- Switches
- Data
- Battery Charger
