72V06L25J8
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | PLCC |
| Number of Pins | 32 |
| Published | 2009 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 32 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 1.27mm |
| Pin Count | 32 |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Element Configuration | Dual |
| Nominal Supply Current | 75mA |
| Max Supply Current | 75mA |
| Clock Frequency | 28.5MHz |
| Access Time | 25 ns |
| Organization | 16KX9 |
| Density | 144 kb |
| Standby Current-Max | 0.005A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Asynchronous |
| Word Size | 9b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| FWFT Support | No |
| Output Enable | NO |
| Cycle Time | 35 ns |
| Height Seated (Max) | 3.556mm |
| Length | 13.97mm |
| Width | 11.43mm |
| Thickness | 2.79mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72V06L25J8 Overview
The PLCC package contains FIFO memory chip.Memory IC's recommended mounted way is Surface Mount .An input voltage of 3.3V results in high efficiency.I found that it has 32 terminations in FIFO means.These are the 32 pins for operation.Its maximum operating current is 75mA .The supply voltage should be set to 3.3V in order to achieve FIFO's maximum efficiency.To ensure reliabilFIFOy, FIFO runs at a minimum working temperature of 0°C degrees Celsius.By operating at 70°C degrees Celsius, this FIFO products is able to maintain a stable operation.This gadget is self-contained in?FIFOs .A OTHER FIFO memory type IC is used in the part.In some cases, FIFO operates at a very low supply voltage, such as 3V V.An input voltage of 3.6V V is the maximum that FIFO memory can handle.The FIFO memory IC is equipped with a total of 32 pins.The clock of the FIFO memory IC runs at 28.5MHz frequency.
72V06L25J8 Features
FIFOs category
Clock frequency of 28.5MHz
72V06L25J8 Applications
There are a lot of Integrated Device Technology (IDT) 72V06L25J8 FIFOs Memory applications.
- Extended product-change notification
- PC peripheral
- High-speed disk
- Video Processing
- Data-acquisition systems
- Networking
- Tape controllers
- Event Recorder
- SPI Bus Flash Memory Devices
- Test site
