72V06L25JI8
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | PLCC |
| Number of Pins | 32 |
| Packaging | Tape & Reel |
| Published | 2009 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 32 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 1.27mm |
| Pin Count | 32 |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Element Configuration | Dual |
| Nominal Supply Current | 75mA |
| Max Supply Current | 75mA |
| Clock Frequency | 28.5MHz |
| Access Time | 25 ns |
| Organization | 16KX9 |
| Density | 144 kb |
| Standby Current-Max | 0.005A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Asynchronous |
| Word Size | 9b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| FWFT Support | No |
| Output Enable | NO |
| Cycle Time | 35 ns |
| Height Seated (Max) | 3.556mm |
| Length | 13.97mm |
| Width | 11.43mm |
| Thickness | 2.79mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72V06L25JI8 Overview
FIFO memory chip is contained in the PLCC package.There's a Tape & Reel on the package.Mounting it in the Surface Mount way is recommended.With a supply voltage of 3.3V volts, high efficiency is possible.As a result of this, FIFO means contains 32 terminations.Operation pins are 32 .FIFO design requires 75mA amps of current to operate.In order to maximize efficiency, the supply voltage should be set to 3.3V .In order to ensure reliability, FIFO is maintained at -40°C degrees Celsius at all times.85°C °C is the memory logic's maximum operating temperature that allows stable operation.There is a self-contained gadget within FIFOs .In this part, the memory type is OTHER FIFO .Typically, FIFO would work at 3V volts, but it may also work at higher voltages.A maximum voltage of 3.6V volts can be applied to FIFO memory.This FIFO memory IC is equipped with 32 pins in total.A clock running at frequency 28.5MHz is used by the FIFO memory IC.
72V06L25JI8 Features
FIFOs category
Clock frequency of 28.5MHz
72V06L25JI8 Applications
There are a lot of Integrated Device Technology (IDT) 72V06L25JI8 FIFOs Memory applications.
- Game Controller
- Disk Controllers
- Event Recorder
- Routers
- Cardiac Monitoring Device
- TVs
- Networking
- General Data Collection Applications at Extreme High-Temperatures
- Portable Information Devices
- Portable Information Devices
