72V06L35J
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | PLCC |
| Number of Pins | 32 |
| Published | 2009 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 32 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 1.27mm |
| Pin Count | 32 |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Element Configuration | Dual |
| Nominal Supply Current | 75mA |
| Max Supply Current | 75mA |
| Clock Frequency | 22.2MHz |
| Access Time | 35 ns |
| Organization | 16KX9 |
| Density | 144 kb |
| Standby Current-Max | 0.005A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Asynchronous |
| Word Size | 9b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| Programmable Flags Support | No |
| Output Enable | NO |
| Cycle Time | 45 ns |
| Height Seated (Max) | 3.556mm |
| Length | 13.97mm |
| Width | 11.43mm |
| Thickness | 2.79mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72V06L35J Overview
You can find FIFO memory chip in package PLCC .The recommended mounting way is Surface Mount .With a supply voltage of 3.3V volts, high efficiency is possible.I found that it has 32 terminations in FIFO means.As far as the operation pins are concerned, they are 32 pins.FIFO design requires 75mA amps of current to operate.A supply voltage of 3.3V is recommended for FIFO's maximum efficiency.It operates at 0°C degrees Celsius to ensure reliability.70°C °C is the memory logic's maximum operating temperature that allows stable operation.There is a self-contained gadget within FIFOs .It has a OTHER FIFO memory type IC.There is a possibility that FIFO can operate at very low supply voltages, such as 3V V.This FIFO memory chip can handle maximum supply voltages of 3.6V volts.Currently, it has 32 pins.The FIFO memory IC is controlled by a clock with a frequency of 22.2MHz .
72V06L35J Features
FIFOs category
Clock frequency of 22.2MHz
72V06L35J Applications
There are a lot of Integrated Device Technology (IDT) 72V06L35J FIFOs Memory applications.
- One assembly
- SPD for DDR3 Memory Modules
- Measurement Equipment
- Battery Charger
- High-speed disk
- Extended product-change notification
- Transistors
- Routers
- Industrial Systems
- Controlled baseline
