72V201L10PF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 32 |
| Published | 2008 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 32 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.8mm |
| Frequency | 100MHz |
| Pin Count | 32 |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Element Configuration | Dual |
| Nominal Supply Current | 20mA |
| Max Supply Current | 20mA |
| Frequency (Max) | 100MHz |
| Access Time | 6.5 ns |
| Organization | 256X9 |
| Density | 2.3 kb |
| Standby Current-Max | 0.005A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 9b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| FWFT Support | No |
| Programmable Flags Support | Yes |
| Output Enable | YES |
| Cycle Time | 10 ns |
| Height Seated (Max) | 1.6mm |
| Length | 7mm |
| Width | 7mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72V201L10PF Overview
The TQFP package contains FIFO memory chip.The recommended mounting way is Surface Mount .Supply voltages of 3.3V are capable of achieving high efficiency.In FIFO means, there are 32 terminations.These are the 32 pins for operation.In order to operate it, it requires 20mA volts of current.FIFO is recommended that the supply voltage be set to 3.3V for maximum efficiency.FIFO operates at a minimum temperature of 0°C degrees Celsius to ensure reliabilFIFOy.70°C °C is the memory logic's maximum operating temperature that allows stable operation.In FIFOs , there is a self-contained gadget.A OTHER FIFO type memory IC is present in the FIFO memory chip.FIFO may operate at a very low supply voltage, such as 3V V.A maximum voltage of 3.6V volts can be applied to FIFO memory.The FIFO memory IC is equipped with a total of 32 pins.When the frequency is set to 100MHz it can maintain good accuracy.There is 100MHz FIFO memory IC's maximum value for regular operation.
72V201L10PF Features
FIFOs category
Frequency at most
72V201L10PF Applications
There are a lot of Integrated Device Technology (IDT) 72V201L10PF FIFOs Memory applications.
- TVs
- Rate buffers
- A/D output buffers
- Multi-stage synchronizer
- Controlled baseline
- Look-up Tables
- Character generators
- Smart Meter
- Down-Hole Energy Drilling
- SPI Bus Flash Memory Devices
