72V201L10PF8
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 32 |
| Packaging | Tape & Reel |
| Published | 2005 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 32 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.8mm |
| Frequency | 100MHz |
| Pin Count | 32 |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Element Configuration | Dual |
| Nominal Supply Current | 20mA |
| Max Supply Current | 20mA |
| Frequency (Max) | 100MHz |
| Access Time | 6.5 ns |
| Organization | 256X9 |
| Density | 2.3 kb |
| Standby Current-Max | 0.005A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 9b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| FWFT Support | No |
| Programmable Flags Support | Yes |
| Output Enable | YES |
| Cycle Time | 10 ns |
| Height Seated (Max) | 1.6mm |
| Length | 7mm |
| Width | 7mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72V201L10PF8 Overview
TQFP is the package in which FIFO memory chip is contained.There's a Tape & Reel on the package.It is pointing in the direction of Surface Mount .High efficiency is possible with a supply voltage of 3.3V .In FIFO means, there are 32 terminations.In the case of the operation pins, they are 32 pins.For its operation, 20mA is the maximum current required.FIFO is recommended that the supply voltage be set to 3.3V for maximum efficiency.The FIFO products must be run at a minimum temperature of 0°C degrees Celsius to ensure reliability.As a result of having a maximum operating temperature of 70°C degrees Celsius, the unit is capable of exhibiting stable operation.This gadget is self-contained in?FIFOs .It has a type OTHER FIFO memory IC.FIFO memory chips may be operated at very low supply voltages, such as 3V volts.A maximum voltage of 3.6V volts can be applied to FIFO memory.Approximately 32 pins are attached to it.It maintains good accuracy at a 100MHz frequency.It is recommended that the FIFO memory's maximum value be set to 100MHz .
72V201L10PF8 Features
FIFOs category
Frequency at most
72V201L10PF8 Applications
There are a lot of Integrated Device Technology (IDT) 72V201L10PF8 FIFOs Memory applications.
- Character generators
- Rate buffers
- Buses
- Network bridges
- Computers
- General Data Collection Applications at Extreme High-Temperatures
- Event Recorder
- Multi-stage synchronizer
- Video Processing
- Desktop Computers
