72V201L10PFG
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 32 |
| Published | 2008 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 32 |
| ECCN Code | EAR99 |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.8mm |
| Frequency | 100MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 32 |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Element Configuration | Dual |
| Nominal Supply Current | 20mA |
| Max Supply Current | 20mA |
| Frequency (Max) | 100MHz |
| Access Time | 6.5 ns |
| Organization | 256X9 |
| Density | 2.3 kb |
| Standby Current-Max | 0.005A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 9b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| FWFT Support | No |
| Programmable Flags Support | Yes |
| Output Enable | YES |
| Cycle Time | 10 ns |
| Height Seated (Max) | 1.6mm |
| Length | 7mm |
| Width | 7mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
72V201L10PFG Overview
The TQFP package contains FIFO memory chip.Surface Mount is recommended as the mounting method.When the supply voltage is 3.3V , high efficiency is possible.FIFO means contains a total of 32 terminations.There are 32 pins on the operation pins.The maximum current required for its operation is 20mA .For FIFO's maximum efficiency, the supply voltage should be set to 3.3V .The FIFO products must be run at a minimum temperature of 0°C degrees Celsius to ensure reliability.A memory logic's maximum operating temperature of 70°C degrees Celsius assures stable operation.The gadget in FIFOs is self-contained.The IC of the part is of the type OTHER FIFO .The FIFO memory chip may be operated at very low supply voltages, such as3V volts.This FIFO memory chip can handle maximum supply voltages of 3.6V volts.Approximately 32 pins are attached to it.In the presence of a 100MHz frequency, it can maintain good accuracy.For regular operation, the memory logic's maximum value is 100MHz .
72V201L10PFG Features
FIFOs category
Frequency at most
72V201L10PFG Applications
There are a lot of Integrated Device Technology (IDT) 72V201L10PFG FIFOs Memory applications.
- Tape controllers
- Video time base correction
- Magnetic memories
- Optical memories
- Data communications
- Multi-stage synchronizer
- General Data Collection Applications at Low-Temperatures
- Portable Information Devices
- High-speed disk
- Consumer
