72V201L10PFG8
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 32 |
| Published | 2008 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 32 |
| ECCN Code | EAR99 |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.8mm |
| Frequency | 100MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 32 |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Element Configuration | Dual |
| Nominal Supply Current | 20mA |
| Max Supply Current | 20mA |
| Frequency (Max) | 100MHz |
| Access Time | 6.5 ns |
| Organization | 256X9 |
| Density | 2.3 kb |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 9b |
| Bus Directional | Unidirectional |
| FWFT Support | No |
| Programmable Flags Support | Yes |
| Output Enable | YES |
| Cycle Time | 10 ns |
| Height Seated (Max) | 1.6mm |
| Length | 7mm |
| Width | 7mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
72V201L10PFG8 Overview
TQFP is the package in which FIFO memory chip is contained.The recommended mounting way is Surface Mount .With a supply voltage of 3.3V volts, high efficiency is possible.A total of 32 terminations are contained within FIFO means.In the case of the operation pins, they are 32 pins.In order for FIFO design to operate, FIFO design requires a maximum current of 20mA .FIFO is recommended that the supply voltage be set to 3.3V in order to maximize efficiency.For reliability, FIFO works at a minimum temperature of 0°C degrees Celsius.The stable operation is enabled by the memory logic's maximum operating temperature of 70°C °C.FIFO memory chips may be operated at very low supply voltages, such as 3V volts.The memory logic's maximum supply voltage is 3.6V volts.The FIFO memory IC has a total of 32 pins.With a frequency of 100MHz , it exhibits good accuracy.The memory logic's maximum value is 100MHz for regular operation.
72V201L10PFG8 Features
Frequency at most
72V201L10PFG8 Applications
There are a lot of Integrated Device Technology (IDT) 72V201L10PFG8 FIFOs Memory applications.
- Extended product-change notification
- TVs
- Code converters
- SPI Bus Flash Memory Device
- Multimedia
- Medical Monitoring Device
- Desktop Computers
- Game Consoles
- Test Equipment
- One assembly
