72V201L15J8
| Parameters | |
|---|---|
| Output Enable | YES |
| Cycle Time | 15 ns |
| Height Seated (Max) | 3.55mm |
| Length | 13.97mm |
| Width | 11.43mm |
| Thickness | 2.79mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | PLCC |
| Number of Pins | 32 |
| Packaging | Tape & Reel |
| Published | 2005 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 32 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 1.27mm |
| Frequency | 66.7MHz |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 32 |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Element Configuration | Dual |
| Nominal Supply Current | 20mA |
| Max Supply Current | 20mA |
| Frequency (Max) | 66.7MHz |
| Access Time | 10 ns |
| Organization | 256X9 |
| Density | 2.3 kb |
| Standby Current-Max | 0.005A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 9b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| FWFT Support | No |
| Programmable Flags Support | Yes |
72V201L15J8 Overview
PLCC is a package that contains FIFO memory chip.Tape & Reel case is used for packaging.Memory IC's recommended mounted way is Surface Mount .If the supply voltage is set to 3.3V , high efficiency can be achieved.In FIFO means, there are 32 terminations.32 pins are used for operation.The maximum current required for its operation is 20mA .The supply voltage should be set to 3.3V in order to achieve FIFO's maximum efficiency.It operates at 0°C degrees Celsius to ensure reliability.A memory logic's maximum operating temperature of 70°C degrees Celsius assures stable operation.The gadget in FIFOs is self-contained.This part has a memory type of OTHER FIFO .Typically, FIFO would work at 3V volts, but it may also work at higher voltages.A maximum voltage of 3.6V volts can be applied to FIFO memory.The FIFO memory IC has a total of 32 pins.In the presence of a 66.7MHz frequency, it can maintain good accuracy.The memory logic's maximum value is 66.7MHz for regular operation.
72V201L15J8 Features
FIFOs category
Frequency at most
72V201L15J8 Applications
There are a lot of Integrated Device Technology (IDT) 72V201L15J8 FIFOs Memory applications.
- Signal processing
- Down-Hole Energy Drilling
- Multi-stage synchronizer
- Video Processing
- Cardiac Monitoring Device
- Computers
- HDD
- TVs
- Application that requires re-writable nonvolatile parameter memory
- Programmable Logic Controller
