72V201L20PF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 32 |
| Published | 2005 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 32 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.8mm |
| Frequency | 50MHz |
| Pin Count | 32 |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Element Configuration | Dual |
| Nominal Supply Current | 20mA |
| Max Supply Current | 20mA |
| Frequency (Max) | 50MHz |
| Access Time | 12 ns |
| Data Bus Width | 9b |
| Organization | 256X9 |
| Density | 2.3 kb |
| Standby Current-Max | 0.005A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 9b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Programmable Flags Support | Yes |
| Output Enable | YES |
| Cycle Time | 20 ns |
| Height Seated (Max) | 1.6mm |
| Length | 7mm |
| Width | 7mm |
| Thickness | 1.4mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72V201L20PF Overview
FIFO memory chip can be found in the TQFP package.It is pointing in the direction of Surface Mount .When the supply voltage is 3.3V there is the possibility of high efficiency.The number of terminations in FIFO means is 32 .32 pins are the operation pins.In order to operate FIFO design, a maximum current of 20mA is required.A supply voltage of 3.3V is recommended for FIFO's maximum efficiency.To ensure reliabilFIFOy, FIFO runs at a minimum working temperature of 0°C degrees Celsius.Keeping the operating temperature at 70°C °C allows the FIFO products to operate continuously.In FIFOs , this gadget is self-contained.It has a OTHER FIFO memory type IC.There is a possibility that FIFO may operate at a very low supply voltage, such as 3V V.The memory logic's maximum supply voltage is 3.6V volts.The FIFO memory IC has a total of 32 pins.It is capable of maintaining good accuracy with a frequency of 50MHz .A FIFO memory's maximum value of 50MHz can be used for regular operation.
72V201L20PF Features
FIFOs category
Frequency at most
72V201L20PF Applications
There are a lot of Integrated Device Technology (IDT) 72V201L20PF FIFOs Memory applications.
- Data communications
- SPI Bus Flash Memory Device
- Smart Meter
- GPS Offender Tracking
- Video Processing
- Test site
- High-speed graphics pixel buffer
- Programmable Logic Controller
- Game Controller
- Temporary storage elements
