72V205L10PF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 64 |
| Published | 2009 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 64 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | EASILY EXPANDABLE IN DEPTH AND WIDTH |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.8mm |
| Frequency | 100MHz |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 64 |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Element Configuration | Dual |
| Nominal Supply Current | 30mA |
| Max Supply Current | 30mA |
| Frequency (Max) | 100MHz |
| Access Time | 6.5 ns |
| Organization | 256X18 |
| Density | 4.5 kb |
| Standby Current-Max | 0.005A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 18b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | No |
| FWFT Support | Yes |
| Output Enable | YES |
| Cycle Time | 10 ns |
| Height Seated (Max) | 1.6mm |
| Length | 14mm |
| Width | 14mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72V205L10PF Overview
The TQFP package contains FIFO memory chip.Mounting it Surface Mount is recommended.If the supply voltage is set to 3.3V , high efficiency can be achieved.FIFO consists of 64 terminations, which indicates that FIFO means is empty.64 pins are used for operation.FIFO design requires 30mA amps of current to operate.In order to maximize efficiency, the supply voltage should be set to 3.3V .During operation, a minimum temperature of 0°C degrees Celsius should be maintained in order to ensure reliability.A memory logic's maximum operating temperature of 70°C degrees Celsius assures stable operation.There is a self-contained gadget within FIFOs .The IC of the part is of the type OTHER FIFO .If the supply voltage is very low, such as 3V V, FIFO may be able to operate.The FIFO memory chip is capable of handling maximum supply voltages of 3.6V volts.A total of 64 pins are present on the FIFO memory IC.When the frequency is set to 100MHz , the system can maintain good accuracy.A FIFO memory's maximum value of 100MHz can be used for regular operation.With the help of this FIFO memory, EASILY EXPANDABLE IN DEPTH AND WIDTH can also be generated.
72V205L10PF Features
FIFOs category
Frequency at most
72V205L10PF Applications
There are a lot of Integrated Device Technology (IDT) 72V205L10PF FIFOs Memory applications.
- Microprogramming
- General Data Collection Applications at Low-Temperatures
- Game Consoles
- Fabrication Site
- Test Equipment
- Character generators
- Telecommunication
- SPI Bus Flash Memory Devices
- Routers
- Networking
