72V205L10PF8
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 64 |
| Published | 2009 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 64 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | EASILY EXPANDABLE IN DEPTH AND WIDTH |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.8mm |
| Frequency | 100MHz |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 64 |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Element Configuration | Dual |
| Nominal Supply Current | 30mA |
| Max Supply Current | 30mA |
| Frequency (Max) | 100MHz |
| Access Time | 6.5 ns |
| Organization | 256X18 |
| Density | 4.5 kb |
| Standby Current-Max | 0.005A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 18b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | No |
| FWFT Support | Yes |
| Output Enable | YES |
| Cycle Time | 10 ns |
| Height Seated (Max) | 1.6mm |
| Length | 14mm |
| Width | 14mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72V205L10PF8 Overview
FIFO memory chip is contained in the TQFP package.Mounting it in Surface Mount is recommended.It is possible to achieve high efficiency with a supply voltage of 3.3V .In FIFO means, there are 64 terminations.Operation pins are 64 .FIFO design requires a maximum current of 30mA to operate.In order to maximize efficiency, the supply voltage should be set to 3.3V .Keeping the temperature at 0°C degrees Celsius ensures its reliability.Keeping the operating temperature at 70°C °C allows the FIFO products to operate continuously.A self-contained gadget is contained in FIFOs .This part is equipped with an IC of type OTHER FIFO memory.FIFO memory chips may be operated at very low supply voltages, such as 3V volts.FIFO memory can handle a maximum supply voltage of 3.6V volts.Approximately 64 pins are attached to it.A frequency of 100MHz is capable of maintaining good accuracy.A FIFO memory's maximum value of 100MHz can be used for regular operation.The gadget can also generate a value of EASILY EXPANDABLE IN DEPTH AND WIDTH .
72V205L10PF8 Features
FIFOs category
Frequency at most
72V205L10PF8 Applications
There are a lot of Integrated Device Technology (IDT) 72V205L10PF8 FIFOs Memory applications.
- Network bridges
- Portable Information Devices
- Multi-stage synchronizer
- Computer Systems
- High-speed disk
- Test Equipment
- Magnetic memories
- Signal processing
- GPS Offender Tracking
- Digital buffering
