72V205L15PFGI
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 64 |
| Published | 2009 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 64 |
| ECCN Code | EAR99 |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.8mm |
| Frequency | 66.7MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 64 |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Element Configuration | Dual |
| Nominal Supply Current | 30mA |
| Max Supply Current | 30mA |
| Frequency (Max) | 66.7MHz |
| Access Time | 10 ns |
| Organization | 256X18 |
| Density | 4.5 kb |
| Standby Current-Max | 0.005A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 18b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | No |
| FWFT Support | Yes |
| Output Enable | YES |
| Cycle Time | 15 ns |
| Height Seated (Max) | 1.6mm |
| Length | 14mm |
| Width | 14mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
72V205L15PFGI Overview
You will find FIFO memory chip in the TQFP package.The recommended mounting way is Surface Mount .A supply voltage of 3.3V allows for high efficiency.A total of 64 terminations are contained within FIFO means.These are the 64 pins for operation.In order to operate it, it requires 30mA volts of current.FIFO is recommended that the supply voltage be set to 3.3V for maximum efficiency.During operation, a minimum temperature of -40°C degrees Celsius should be maintained in order to ensure reliability.By operating at a temperature of 85°C °C, the FIFO products is capable of stable operation.A self-contained gadget is contained within FIFOs .It has a type OTHER FIFO memory IC.The FIFO memory chip may be operated at very low supply voltages, such as3V volts.FIFO memory can handle a maximum supply voltage of 3.6V volts.Currently, it has 64 pins.A frequency of 66.7MHz is sufficient to maintain good accuracy.During regular operation, 66.7MHz is the FIFO memory's maximum value.
72V205L15PFGI Features
FIFOs category
Frequency at most
72V205L15PFGI Applications
There are a lot of Integrated Device Technology (IDT) 72V205L15PFGI FIFOs Memory applications.
- Signal processing
- Wireless
- Industrial Systems
- SPI Bus Flash Memory Device
- Firmware loaders
- Telecommunication
- Fabrication Site
- Digital buffering
- Down-Hole Energy Drilling
- Disk Controllers
