72V205L15TF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | LQFP |
| Number of Pins | 64 |
| Published | 2009 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 64 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | EASILY EXPANDABLE IN DEPTH AND WIDTH |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Frequency | 66.7MHz |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 64 |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Memory Size | 512B |
| Element Configuration | Dual |
| Nominal Supply Current | 30mA |
| Max Supply Current | 30mA |
| Frequency (Max) | 66.7MHz |
| Access Time | 10 ns |
| Data Bus Width | 18b |
| Organization | 256X18 |
| Density | 4.5 kb |
| Standby Current-Max | 0.005A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 18b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | No |
| FWFT Support | Yes |
| Output Enable | YES |
| Cycle Time | 15 ns |
| Height Seated (Max) | 1.6mm |
| Length | 10mm |
| Width | 10mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72V205L15TF Overview
FIFO memory chip can be found in the LQFP package.There is a memory of 512B available for storing data and applications.Memory IC's recommended mounted way is Surface Mount .High efficiency is possible with a supply voltage of 3.3V .A total of 64 terminations are contained within FIFO means.FIFO design has 64 operation pins.There is a maximum current requirement of 30mA for its operation.A supply voltage of 3.3V is recommended for FIFO's maximum efficiency.It is designed to run at a minimum temperature of 0°C degrees Celsius to ensure reliability.By operating at a temperature of 70°C °C, the FIFO products is capable of stable operation.It is contained within FIFOs .In this part, the memory type is OTHER FIFO .It is possible to operate the FIFO memory chip at very low supply voltages, such as 3V volts.A maximum supply voltage of 3.6V V can be handled by this FIFO memory chip.The FIFO memory IC is equipped with a total of 64 pins.A frequency of 66.7MHz is capable of maintaining good accuracy.For regular operation, the memory logic's maximum value is 66.7MHz .Using this gadget, EASILY EXPANDABLE IN DEPTH AND WIDTH can also be generated.
72V205L15TF Features
512B memory size
FIFOs category
Frequency at most
72V205L15TF Applications
There are a lot of Integrated Device Technology (IDT) 72V205L15TF FIFOs Memory applications.
- GPS Offender Tracking
- Communications Systems
- Laser Receiver System
- Extended product life cycle
- Transistors
- Extended product-change notification
- Routers
- Event Recorder
- Computer networks
- Application that requires re-writable nonvolatile parameter memory
