72V205L15TFI
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | LQFP |
| Number of Pins | 64 |
| Published | 2009 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 64 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Frequency | 66.7MHz |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 64 |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Element Configuration | Dual |
| Nominal Supply Current | 30mA |
| Max Supply Current | 30mA |
| Frequency (Max) | 66.7MHz |
| Access Time | 10 ns |
| Organization | 256X18 |
| Density | 4.5 kb |
| Standby Current-Max | 0.005A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 18b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | No |
| FWFT Support | Yes |
| Output Enable | YES |
| Cycle Time | 15 ns |
| Height Seated (Max) | 1.6mm |
| Length | 10mm |
| Width | 10mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72V205L15TFI Overview
You can find FIFO memory chip in the LQFP package.The recommended mounting way is Surface Mount .When the supply voltage is 3.3V , high efficiency is possible.I found that it has 64 terminations in FIFO means.In the case of the operation pins, they are 64 pins.In order to operate FIFO design, a maximum current of 30mA is required.FIFO is recommended that the supply voltage be set to 3.3V for maximum efficiency.This FIFO products runs at -40°C degrees Celsius at a minimum temperature to ensure reliability.By operating at a temperature of 85°C °C, the FIFO products is capable of stable operation.The gadget is self-contained and can be found in FIFOs .It has a type OTHER FIFO memory IC.If the supply voltage is very low, such as 3V V, FIFO may be able to operate.There is a maximum supply voltage of 3.6V volts that FIFO memory can handle.There are a total of 64 pins on this board.It is capable of maintaining good accuracy with a frequency of 66.7MHz .A FIFO memory's maximum value of 66.7MHz can be used for regular operation.
72V205L15TFI Features
FIFOs category
Frequency at most
72V205L15TFI Applications
There are a lot of Integrated Device Technology (IDT) 72V205L15TFI FIFOs Memory applications.
- Controlled baseline
- Cardiac Monitoring Device
- IP Radio
- MP3 Interface for Automobile
- Communications Systems
- Transistors
- Disk Controllers
- Video time base correction
- SPI Bus Flash Memory Devices
- Consumer
