72V2101L15PF
| Parameters | |
|---|---|
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| Output Enable | YES |
| Cycle Time | 15 ns |
| Height Seated (Max) | 1.6mm |
| Length | 14mm |
| Width | 14mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 64 |
| Published | 2008 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 64 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | RETRANSMIT; AUTO POWER DOWN |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.8mm |
| Frequency | 66.7MHz |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 64 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 3.45V |
| Min Supply Voltage | 3.15V |
| Element Configuration | Dual |
| Nominal Supply Current | 55mA |
| Max Supply Current | 55mA |
| Frequency (Max) | 66.7MHz |
| Access Time | 10 ns |
| Organization | 256KX9 |
| Density | 2.3 Mb |
| Standby Current-Max | 0.02A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 9b |
| Memory IC Type | OTHER FIFO |
72V2101L15PF Overview
TQFP is a package that contains FIFO memory chip.Memory IC's recommended mounted way is Surface Mount .High efficiency is possible with a supply voltage of 3.3V .The number of terminations in FIFO means is 64 .There are 64 pins on the operation pins.Its maximum operating current is 55mA .The supply voltage should be set to 3.3V in order to achieve FIFO's maximum efficiency.Keeping the temperature at 0°C degrees Celsius ensures its reliability.The stable operation is enabled by the memory logic's maximum operating temperature of 70°C °C.The gadget in FIFOs is self-contained.This part is equipped with an IC of type OTHER FIFO memory.There is a possibility that FIFO can operate at very low supply voltages, such as 3.15V V.FIFO memory can handle a maximum supply voltage of 3.45V V.The FIFO memory IC is equipped with a total of 64 pins.When the frequency is set to 66.7MHz it can maintain good accuracy.Normally, the FIFO memory's maximum value is 66.7MHz .Additionally, this FIFO memory can be used to generate RETRANSMIT; AUTO POWER DOWN .
72V2101L15PF Features
FIFOs category
Frequency at most
72V2101L15PF Applications
There are a lot of Integrated Device Technology (IDT) 72V2101L15PF FIFOs Memory applications.
- Network switching/routing
- Consumer
- Notebook
- Wireless
- Video Processing
- Firmware loaders
- Programmable Logic Controller
- Telecommunication
- Measurement Equipment
- Medical Monitoring Device
