banner_page

72V2101L15PFI

64 Terminations3.3V 64 Pin FIFO memory IC10 ns Min 3.15V VMax 3.45V V


  • Manufacturer: Integrated Device Technology (IDT)
  • Nocochips NO: 378-72V2101L15PFI
  • Package: TQFP
  • Datasheet: PDF
  • Stock: 225
  • Description: 64 Terminations3.3V 64 Pin FIFO memory IC10 ns Min 3.15V VMax 3.45V V(Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Contact Plating Lead, Tin
Mount Surface Mount
Package / Case TQFP
Number of Pins 64
Published 2008
JESD-609 Code e0
Pbfree Code no
Part Status Active
Moisture Sensitivity Level (MSL) 3
Number of Terminations 64
ECCN Code EAR99
Terminal Finish Tin/Lead (Sn85Pb15)
Max Operating Temperature 85°C
Min Operating Temperature -40°C
HTS Code 8542.32.00.71
Subcategory FIFOs
Technology CMOS
Terminal Position QUAD
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 240
Number of Functions 1
Supply Voltage 3.3V
Terminal Pitch 0.8mm
Frequency 66.7MHz
Time@Peak Reflow Temperature-Max (s) 20
Pin Count 64
Qualification Status Not Qualified
Operating Supply Voltage 3.3V
Temperature Grade INDUSTRIAL
Max Supply Voltage 3.45V
Min Supply Voltage 3.15V
Element Configuration Dual
Nominal Supply Current 55mA
Max Supply Current 55mA
Frequency (Max) 66.7MHz
Access Time 10 ns
Organization 256KX9
Density 2.3 Mb
Standby Current-Max 0.02A
Parallel/Serial PARALLEL
Sync/Async Synchronous
Word Size 9b
Memory IC Type OTHER FIFO
Bus Directional Unidirectional
Retransmit Capability Yes
Output Enable YES
Cycle Time 15 ns
Height Seated (Max) 1.6mm
Length 14mm
Width 14mm
Thickness 1.4mm
RoHS Status RoHS Compliant
Lead Free Contains Lead

72V2101L15PFI Overview


This package is included in TQFP .Surface Mount is recommended as the mounting method.If the supply voltage is set to 3.3V , high efficiency can be achieved.64 terminations are contained in FIFO means.In the case of the operation pins, they are 64 pins.In order for FIFO design to operate, FIFO design requires a maximum current of 55mA .The supply voltage should be set to 3.3V in order to achieve FIFO's maximum efficiency.For reliability, FIFO works at a minimum temperature of -40°C degrees Celsius.The stable operation is enabled by the memory logic's maximum operating temperature of 85°C °C.This gadget is self-contained in?FIFOs .A OTHER FIFO memory type IC is used in the part.If the supply voltage is very low, such as 3.15V V, FIFO may be able to operate.A maximum voltage of 3.45V volts can be applied to FIFO memory.There are a total of 64 pins on this FIFO memory IC.Despite a frequency of 66.7MHz , it is capable of maintaining good accuracy.The memory logic's maximum value is 66.7MHz for regular operation.

72V2101L15PFI Features


FIFOs category
Frequency at most

72V2101L15PFI Applications


There are a lot of Integrated Device Technology (IDT) 72V2101L15PFI FIFOs Memory applications.

  • Address mapping
  • Microprogramming
  • HDD
  • Consumer Systems
  • Event Recorder
  • SPD for DDR3 Memory Modules
  • Data communications
  • Thermal Management for DDR3 Memory Modules
  • MP3 Interface for Automobile
  • PC peripheral

Write a review

Note: HTML is not translated!
    Bad           Good