72V2103L10PF8
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 80 |
| Published | 2009 |
| Part Status | Active |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Frequency | 100MHz |
| Operating Supply Voltage | 3.3V |
| Max Supply Voltage | 3.45V |
| Min Supply Voltage | 3.15V |
| Element Configuration | Dual |
| Nominal Supply Current | 35mA |
| Max Supply Current | 35mA |
| Frequency (Max) | 100MHz |
| Access Time | 6.5 ns |
| Density | 2.3 Mb |
| Sync/Async | Synchronous |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| Length | 14mm |
| Width | 14mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72V2103L10PF8 Overview
TQFP is the package in which FIFO memory chip is contained.Surface Mount is recommended as the mounting method.Operation pins are 80 .In order to operate it, it requires 35mA volts of current.In order to maximize efficiency, the supply voltage should be set to 3.3V .This FIFO products runs at 0°C degrees Celsius at a minimum temperature to ensure reliability.Keeping the operating temperature at 70°C °C allows the FIFO products to operate continuously.Typically, FIFO would work at 3.15V volts, but it may also work at higher voltages.An input voltage of 3.45V V is the maximum that FIFO memory can handle.It maintains good accuracy at a 100MHz frequency.Normally, the FIFO memory's maximum value is 100MHz .
72V2103L10PF8 Features
Frequency at most
72V2103L10PF8 Applications
There are a lot of Integrated Device Technology (IDT) 72V2103L10PF8 FIFOs Memory applications.
- Alarm System
- Signal processing
- Product traceability
- IP Camera Buffer
- A/D output buffers
- Address mapping
- Temporary storage elements
- SPD for DDR3 Memory Modules
- Notebook
- TVs
