72V2103L15PF8
| Parameters | |
|---|---|
| Number of Pins | 80 |
| Published | 2009 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 80 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Frequency | 66.7MHz |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 80 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 3.45V |
| Min Supply Voltage | 3.15V |
| Element Configuration | Dual |
| Nominal Supply Current | 35mA |
| Max Supply Current | 35mA |
| Frequency (Max) | 66.7MHz |
| Access Time | 10 ns |
| Organization | 128KX18 |
| Density | 2.3 Mb |
| Standby Current-Max | 0.015A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| Output Enable | YES |
| Cycle Time | 15 ns |
| Height Seated (Max) | 1.6mm |
| Length | 14mm |
| Width | 14mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | TQFP |
72V2103L15PF8 Overview
TQFP is the package in which FIFO memory chip is contained.Mounting it in the Surface Mount way is recommended.An input voltage of 3.3V results in high efficiency.The number of terminations in FIFO means is 80 .There are 80 pins for operation.For its operation, 35mA is the maximum current required.A voltage of 3.3V should be used for FIFO's maximum efficiency.It operates at 0°C degrees Celsius to ensure reliability.Its maximum operating temperature of 70°C °C ensures stable operation.The gadget is self-contained and can be found in FIFOs .This part has a memory type of OTHER FIFO .FIFO may operate at a very low supply voltage, such as 3.15V V.A maximum voltage of 3.45V volts can be applied to FIFO memory.The FIFO memory IC is equipped with a total of 80 pins.With a frequency of 66.7MHz , it maintains good accuracy.The memory logic's maximum value is 66.7MHz for regular operation.
72V2103L15PF8 Features
FIFOs category
Frequency at most
72V2103L15PF8 Applications
There are a lot of Integrated Device Technology (IDT) 72V2103L15PF8 FIFOs Memory applications.
- Tape controllers
- Signal processing
- SPD for DDR3 Memory Modules
- Code converters
- A/D output buffers
- Multi-stage synchronizer
- Firmware loaders
- Computers
- Communications Systems
- Test Equipment
