72V2103L7-5BCI
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Number of Pins | 100 |
| Published | 2009 |
| Part Status | Active |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Frequency | 133.3MHz |
| Operating Supply Voltage | 3.3V |
| Max Supply Voltage | 3.45V |
| Min Supply Voltage | 3.15V |
| Element Configuration | Dual |
| Nominal Supply Current | 35mA |
| Max Supply Current | 35mA |
| Frequency (Max) | 133.3MHz |
| Access Time | 5 ns |
| Direction | Unidirectional |
| Density | 2.3 Mb |
| Sync/Async | Synchronous |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| FWFT Support | Yes |
| Programmable Flags Support | Yes |
| Length | 11mm |
| Width | 11mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72V2103L7-5BCI Overview
It is pointing in the direction of Surface Mount .In the case of the operation pins, they are 100 pins.There is a maximum current requirement of 35mA for its operation.Set the supply voltage to 3.3V to ensure FIFO's maximum efficiency.This FIFO products runs at -40°C degrees Celsius at a minimum temperature to ensure reliability.As a result of having a maximum operating temperature of 85°C degrees Celsius, the unit is capable of exhibiting stable operation.There is a possibility that FIFO can operate at very low supply voltages, such as 3.15V V.A maximum voltage of 3.45V volts can be applied to FIFO memory.It is capable of maintaining good accuracy with a frequency of 133.3MHz .It is recommended that the FIFO memory's maximum value be set to 133.3MHz .
72V2103L7-5BCI Features
Frequency at most
72V2103L7-5BCI Applications
There are a lot of Integrated Device Technology (IDT) 72V2103L7-5BCI FIFOs Memory applications.
- Consumer
- Switches
- Code converters
- Communications Systems
- Multi-stage synchronizer
- Test site
- Signal processing
- Disk Controllers
- Digital buffering
- Portable Information Devices
