72V2105L10PF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 64 |
| Published | 2008 |
| Part Status | Active |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Frequency | 100MHz |
| Operating Supply Voltage | 3.3V |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Element Configuration | Dual |
| Nominal Supply Current | 60mA |
| Max Supply Current | 60mA |
| Frequency (Max) | 100MHz |
| Access Time | 6.5 ns |
| Direction | Unidirectional |
| Density | 4.5 Mb |
| Sync/Async | Synchronous |
| Word Size | 18b |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| FWFT Support | Yes |
| Programmable Flags Support | Yes |
| Length | 14mm |
| Width | 14mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72V2105L10PF Overview
FIFO memory chip can be found in the TQFP package.Surface Mount is memory IC's recommended mounting method.64 pins are the operation pins.In order to operate FIFO design, a maximum current of 60mA is required.A 3.3V supply voltage will ensure FIFO's maximum efficiency.For reliability, FIFO works at a minimum temperature of 0°C degrees Celsius.The stable operation is enabled by the memory logic's maximum operating temperature of 70°C °C.There is a possibility that FIFO may operate at a very low supply voltage, such as 3V V.The FIFO memory chip is capable of handling maximum supply voltages of 3.6V volts.In the presence of a 100MHz frequency, it can maintain good accuracy.During regular operation, 100MHz is the FIFO memory's maximum value.
72V2105L10PF Features
Frequency at most
72V2105L10PF Applications
There are a lot of Integrated Device Technology (IDT) 72V2105L10PF FIFOs Memory applications.
- Firmware loaders
- Extended product life cycle
- GPS Offender Tracking
- TVs
- Computers
- Address mapping
- Game Consoles
- Computer networks
- High-speed graphics pixel buffer
- Smart Meter
