72V2105L10PFG
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 64 |
| Weight | 360.605934mg |
| Published | 2008 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 64 |
| ECCN Code | EAR99 |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | EASILY EXPANDABLE IN DEPTH AND WIDTH |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.8mm |
| Frequency | 100MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 64 |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Memory Size | 512kB |
| Element Configuration | Dual |
| Nominal Supply Current | 60mA |
| Max Supply Current | 60mA |
| Frequency (Max) | 100MHz |
| Access Time | 6.5 ns |
| Data Bus Width | 18b |
| Organization | 256KX18 |
| Density | 4.5 Mb |
| Standby Current-Max | 0.02A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 18b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| Output Enable | YES |
| Cycle Time | 10 ns |
| Height | 1.4mm |
| Length | 14mm |
| Width | 14mm |
| Thickness | 1.4mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
72V2105L10PFG Overview
TQFP is a package that contains FIFO memory chip.A FIFO chip's memory is 512kB , which may be used to store applications and data.Mounting it in the Surface Mount way is recommended.Supply voltages of 3.3V are capable of achieving high efficiency.I found that it has 64 terminations in FIFO means.Operation pins are 64 .In order to operate FIFO design, a maximum current of 60mA is required.A supply voltage of 3.3V is recommended for FIFO's maximum efficiency.To ensure reliabilFIFOy, FIFO runs at a minimum working temperature of 0°C degrees Celsius.Keeping the operating temperature at 70°C °C allows the FIFO products to operate continuously.The gadget is self-contained and can be found in FIFOs .A OTHER FIFO type memory IC is present in the FIFO memory chip.In some cases, FIFO operates at a very low supply voltage, such as 3V V.The FIFO memory chip is capable of handling maximum supply voltages of 3.6V volts.There are a total of 64 pins on this FIFO memory IC.It maintains good accuracy at a 100MHz frequency.It is recommended that the FIFO memory's maximum value be set to 100MHz .With the help of this FIFO memory, EASILY EXPANDABLE IN DEPTH AND WIDTH can also be generated.
72V2105L10PFG Features
512kB memory size
FIFOs category
Frequency at most
72V2105L10PFG Applications
There are a lot of Integrated Device Technology (IDT) 72V2105L10PFG FIFOs Memory applications.
- Industrial Systems
- IP Camera Buffer
- Test Equipment
- Application that requires re-writable nonvolatile parameter memory
- Computer Systems
- One assembly
- SPI Bus Flash Memory Devices
- Extended product-change notification
- Down-Hole Energy Drilling
- Microprogramming
