72V2105L15PFGI
| Parameters | |
|---|---|
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 18b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| Output Enable | YES |
| Cycle Time | 15 ns |
| Height Seated (Max) | 1.6mm |
| Length | 14mm |
| Width | 14mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 64 |
| Published | 2008 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 64 |
| ECCN Code | EAR99 |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.8mm |
| Frequency | 66.7MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 64 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Element Configuration | Dual |
| Nominal Supply Current | 60mA |
| Max Supply Current | 60mA |
| Frequency (Max) | 66.7MHz |
| Access Time | 10 ns |
| Organization | 256KX18 |
| Density | 4.5 Mb |
| Standby Current-Max | 0.02A |
72V2105L15PFGI Overview
TQFP is the package in which FIFO memory chip is contained.Surface Mount is recommended as the mounting method.A supply voltage of 3.3V allows for high efficiency.The number of terminations in FIFO means is 64 .The operation pins are 64 pins.Its maximum operating current is 60mA .A voltage of 3.3V should be used for FIFO's maximum efficiency.For reliability, FIFO works at a minimum temperature of -40°C degrees Celsius.By using a memory logic's maximum operating temperature of 85°C degrees Celsius, stable operation can be achieved.FIFOs contains this gadget in its entirety.In this part, the memory type is OTHER FIFO .Typically, FIFO would work at 3V volts, but it may also work at higher voltages.FIFO memory can handle a maximum supply voltage of 3.6V V.The FIFO memory IC is equipped with a total of 64 pins.Despite a frequency of 66.7MHz , it is capable of maintaining good accuracy.During regular operation, 66.7MHz is the FIFO memory's maximum value.
72V2105L15PFGI Features
FIFOs category
Frequency at most
72V2105L15PFGI Applications
There are a lot of Integrated Device Technology (IDT) 72V2105L15PFGI FIFOs Memory applications.
- Thermal Management for DDR3 Memory Modules
- Computers
- Signal processing
- Multi-stage synchronizer
- Character generators
- Video time base correction
- Communications
- Laser Receiver System
- Digital buffering
- Consumer Systems
