72V2105L15PFI
| Parameters | |
|---|---|
| Min Operating Temperature | -40°C |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.8mm |
| Frequency | 66.7MHz |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 64 |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Element Configuration | Dual |
| Nominal Supply Current | 60mA |
| Max Supply Current | 60mA |
| Frequency (Max) | 66.7MHz |
| Access Time | 10 ns |
| Organization | 256KX18 |
| Density | 4.5 Mb |
| Standby Current-Max | 0.02A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 18b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| Output Enable | YES |
| Cycle Time | 15 ns |
| Height Seated (Max) | 1.6mm |
| Length | 14mm |
| Width | 14mm |
| Thickness | 1.4mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 64 |
| Published | 2008 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 64 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 85°C |
72V2105L15PFI Overview
TQFP is a package that contains FIFO memory chip.The recommended mounting method for this FIFO products is Surface Mount .It is possible to achieve high efficiency with a supply voltage of 3.3V .A total of 64 terminations can be found in FIFO means.FIFO design has 64 operation pins.Its maximum operating current is 60mA .The supply voltage should be set to 3.3V in order to achieve FIFO's maximum efficiency.At a minimum working temperature of -40°C degrees Celsius, FIFO is guaranteed to operate reliably.The stable operation is enabled by the memory logic's maximum operating temperature of 85°C °C.In FIFOs , this gadget is self-contained.A OTHER FIFO type memory IC is present in the FIFO memory chip.If the supply voltage is very low, such as 3V V, FIFO may be able to operate.FIFO memory can handle a maximum supply voltage of 3.6V volts.A total of 64 pins are present on the FIFO memory IC.With a frequency of 66.7MHz , it exhibits good accuracy.It is recommended that the FIFO memory's maximum value be set to 66.7MHz .
72V2105L15PFI Features
FIFOs category
Frequency at most
72V2105L15PFI Applications
There are a lot of Integrated Device Technology (IDT) 72V2105L15PFI FIFOs Memory applications.
- Multimedia
- Data-acquisition systems
- Product traceability
- MP3 Interface for Automobile
- SPI Bus Flash Memory Device
- Desktop Computers
- Network bridges
- Medical Monitoring Device
- Magnetic memories
- HDD
