72V2111L10PF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 64 |
| Published | 2008 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 64 |
| ECCN Code | EAR99 |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | RETRANSMIT; AUTO POWER DOWN |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.8mm |
| Frequency | 100MHz |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 64 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | COMMERCIAL |
| Number of Circuits | 1 |
| Max Supply Voltage | 3.45V |
| Min Supply Voltage | 3.15V |
| Memory Size | 512kB |
| Element Configuration | Dual |
| Nominal Supply Current | 55mA |
| Max Supply Current | 55mA |
| Frequency (Max) | 100MHz |
| Access Time | 6.5 ns |
| Data Bus Width | 9b |
| Density | 4.5 Mb |
| Standby Current-Max | 0.02A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 9b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| Output Enable | YES |
| Length | 14mm |
| Width | 14mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72V2111L10PF Overview
You will find FIFO memory chip in the TQFP package.There is a 512kB MB memory on the FIFO chips, which can be used to store both applications and data.The recommended mounting way is Surface Mount .A supply voltage of 3.3V allows for high efficiency.A total of 64 terminations can be found in FIFO means.There are 64 pins for operation.In order for FIFO design to operate, FIFO design requires a maximum current of 55mA .When the supply voltage is set to 3.3V , the FIFO's maximum efficiency is achieved.The FIFO products must be run at a minimum temperature of 0°C degrees Celsius to ensure reliability.As a result of having a maximum operating temperature of 70°C degrees Celsius, the unit is capable of exhibiting stable operation.In FIFOs , this gadget is self-contained.The IC of the part is of the type OTHER FIFO .FIFO may operate at very low supply voltages, such as 3.15V volts.There is a maximum supply voltage of 3.45V volts that FIFO memory can handle.Approximately 64 pins are attached to it.A frequency of 100MHz is capable of maintaining good accuracy.There is 100MHz FIFO memory IC's maximum value for regular operation.Additionally, this FIFO memory can be used to generate RETRANSMIT; AUTO POWER DOWN .Using 1 circuits gives FIFO memory chip enhanced flexibility.
72V2111L10PF Features
512kB memory size
FIFOs category
Frequency at most
72V2111L10PF Applications
There are a lot of Integrated Device Technology (IDT) 72V2111L10PF FIFOs Memory applications.
- Smart Meter
- Portable Information Devices
- MP3 Interface for Automobile
- Measurement Equipment
- Battery Charger
- Multi-stage synchronizer
- HDD
- Test site
- Magnetic memories
- Character generators
