72V2111L15PF8
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 64 |
| Weight | 360.605934mg |
| Published | 2008 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 64 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | RETRANSMIT; AUTO POWER DOWN |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.8mm |
| Frequency | 66.7MHz |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 64 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 3.45V |
| Min Supply Voltage | 3.15V |
| Element Configuration | Dual |
| Nominal Supply Current | 55mA |
| Max Supply Current | 55mA |
| Frequency (Max) | 66.7MHz |
| Access Time | 10 ns |
| Organization | 512KX9 |
| Density | 4.5 Mb |
| Standby Current-Max | 0.02A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 9b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| Output Enable | YES |
| Cycle Time | 15 ns |
| Height | 1.4mm |
| Length | 14mm |
| Width | 14mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72V2111L15PF8 Overview
FIFO memory chip is contained in the TQFP package.It is pointing in the direction of Surface Mount .When the supply voltage is 3.3V there is the possibility of high efficiency.FIFO means contains 64 terminations.Operation pins are 64 .In order to operate FIFO design, a maximum current of 55mA is required.Set the supply voltage to 3.3V to ensure FIFO's maximum efficiency.FIFO operates at a minimum temperature of 0°C degrees Celsius to ensure reliabilFIFOy.Keeping the operating temperature at 70°C °C allows the FIFO products to operate continuously.There is a self-contained gadget within FIFOs .There is a memory type OTHER FIFO in the IC of this part.FIFO memory chips may be operated at very low supply voltages, such as 3.15V volts.An input voltage of 3.45V V is the maximum that FIFO memory can handle.There are a total of 64 pins on this board.A frequency of 66.7MHz is sufficient to maintain good accuracy.For regular operation, the memory logic's maximum value is 66.7MHz .It is also possible to generate RETRANSMIT; AUTO POWER DOWN by using this FIFO memory.
72V2111L15PF8 Features
FIFOs category
Frequency at most
72V2111L15PF8 Applications
There are a lot of Integrated Device Technology (IDT) 72V2111L15PF8 FIFOs Memory applications.
- Portable Information Devices
- Networking
- HDD
- Multimedia
- Rate buffers
- Portable Information Devices
- Transistors
- Data communications
- Emulators
- Communications
