72V2111L15PFGI8
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Package / Case | LQFP |
| Number of Pins | 64 |
| Packaging | Tape & Reel |
| Published | 2008 |
| Part Status | Active |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Operating Supply Voltage | 3.3V |
| Max Supply Voltage | 3.45V |
| Min Supply Voltage | 3.15V |
| Element Configuration | Dual |
| Max Supply Current | 55mA |
| Frequency (Max) | 66.7MHz |
| Access Time | 10 ns |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| FWFT Support | Yes |
| Programmable Flags Support | Yes |
| Length | 14mm |
| Width | 14mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
72V2111L15PFGI8 Overview
You can find FIFO memory chip in the LQFP package.Tape & Reel case is used for packaging.It is recommended that memory IC be mounted in the Surface Mount direction.These are the 64 pins for operation.FIFO design requires 55mA amps of current to operate.The supply voltage should be set to 3.3V in order to achieve FIFO's maximum efficiency.This FIFO products runs at -40°C degrees Celsius at a minimum temperature to ensure reliability.By operating at a temperature of 85°C °C, the FIFO products is capable of stable operation.It is possible to operate the FIFO memory chip at very low supply voltages, such as 3.15V volts.FIFO memory is capable of handling a maximum supply voltage of 3.45V volts.During regular operation, 66.7MHz is the FIFO memory's maximum value.
72V2111L15PFGI8 Features
Frequency at most
72V2111L15PFGI8 Applications
There are a lot of Integrated Device Technology (IDT) 72V2111L15PFGI8 FIFOs Memory applications.
- Test Equipment
- Disk Controllers
- Data-acquisition systems
- General Data Collection Applications at Extreme High-Temperatures
- Computer networks
- High-speed graphics pixel buffer
- Multi-stage synchronizer
- HDD
- Optical memories
- Fabrication Site
