72V2111L20PF8
| Parameters | |
|---|---|
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 3.45V |
| Min Supply Voltage | 3.15V |
| Element Configuration | Dual |
| Nominal Supply Current | 55mA |
| Max Supply Current | 55mA |
| Frequency (Max) | 50MHz |
| Access Time | 12 ns |
| Organization | 512KX9 |
| Density | 4.5 Mb |
| Standby Current-Max | 0.02A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 9b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| Output Enable | YES |
| Cycle Time | 20 ns |
| Height | 1.4mm |
| Length | 14mm |
| Width | 14mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 64 |
| Weight | 360.605934mg |
| Published | 2008 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 64 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | RETRANSMIT; AUTO POWER DOWN |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.8mm |
| Frequency | 50MHz |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 64 |
72V2111L20PF8 Overview
You will find FIFO memory chip in the TQFP package.Surface Mount is memory IC's recommended mounting method.If the supply voltage is set to 3.3V , high efficiency can be achieved.FIFO means contains 64 terminations.64 pin is used for operation.There is a maximum current requirement of 55mA for its operation.For FIFO's maximum efficiency, the supply voltage should be set to 3.3V .FIFO operates at a minimum temperature of 0°C degrees Celsius to ensure reliabilFIFOy.An operating temperature of 70°C °C is necessary for stable operation.A self-contained gadget is contained in FIFOs .It has a type OTHER FIFO memory IC.Typically, FIFO would work at 3.15V volts, but it may also work at higher voltages.An input voltage of 3.45V V is the maximum that FIFO memory can handle.Currently, it has 64 pins.A frequency of 50MHz is capable of maintaining good accuracy.50MHz is the FIFO memory IC's maximum value for regular operation.This gadget can also be used to generate RETRANSMIT; AUTO POWER DOWN .
72V2111L20PF8 Features
FIFOs category
Frequency at most
72V2111L20PF8 Applications
There are a lot of Integrated Device Technology (IDT) 72V2111L20PF8 FIFOs Memory applications.
- Signal processing
- Portable Information Devices
- A/D output buffers
- Multi-stage synchronizer
- Character generators
- Desktop Computers
- General Data Collection Applications at Extreme High-Temperatures
- SPD for DDR3 Memory Modules
- Programmable Logic Controller
- Laser Receiver System
