72V2113L10PFI
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 80 |
| Weight | 513.60831mg |
| Published | 2009 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 80 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Frequency | 100MHz |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 80 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 3.45V |
| Min Supply Voltage | 3.15V |
| Memory Size | 512kB |
| Element Configuration | Dual |
| Nominal Supply Current | 35mA |
| Max Supply Current | 35mA |
| Frequency (Max) | 100MHz |
| Access Time | 6.5 ns |
| Data Bus Width | 18b |
| Organization | 256KX18 |
| Density | 4.5 Mb |
| Standby Current-Max | 0.015A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| Output Enable | YES |
| Cycle Time | 10 ns |
| Height | 1.4mm |
| Length | 14mm |
| Width | 14mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72V2113L10PFI Overview
You will find FIFO memory chip in the TQFP package.A memory of 512kB is available for storing applications and data on this FIFO chip.Mounting it in Surface Mount is recommended.A supply voltage of 3.3V allows for high efficiency.I found that it has 80 terminations in FIFO means.As far as the operation pins are concerned, they are 80 pins.In order to operate it, it requires 35mA volts of current.Set the supply voltage to 3.3V to ensure FIFO's maximum efficiency.During operation, a minimum temperature of -40°C degrees Celsius should be maintained in order to ensure reliability.By operating at 85°C degrees Celsius, this FIFO products is able to maintain a stable operation.The gadget is self-contained and can be found in FIFOs .A OTHER FIFO memory type IC is used in the part.The FIFO memory chip may be operated at very low supply voltages, such as3.15V volts.A maximum supply voltage of 3.45V volts can be handled by the FIFO memory chip.There are a total of 80 pins on this FIFO memory IC.In the presence of a 100MHz frequency, it can maintain good accuracy.During normal operation, the FIFO memory's maximum value is 100MHz .
72V2113L10PFI Features
512kB memory size
FIFOs category
Frequency at most
72V2113L10PFI Applications
There are a lot of Integrated Device Technology (IDT) 72V2113L10PFI FIFOs Memory applications.
- General Data Collection Applications at Low-Temperatures
- Magnetic memories
- One assembly
- Buses
- Notebook
- GPS Offender Tracking
- Computers
- Desktop Computers
- Analog-to-digital converters
- Extended product life cycle
