72V2113L15PF8
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 80 |
| Published | 2003 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 80 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Frequency | 66.7MHz |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 80 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 3.45V |
| Min Supply Voltage | 3.15V |
| Element Configuration | Dual |
| Nominal Supply Current | 35mA |
| Max Supply Current | 35mA |
| Frequency (Max) | 66.7MHz |
| Access Time | 10 ns |
| Organization | 256KX18 |
| Density | 4.5 Mb |
| Standby Current-Max | 0.015A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| Output Enable | YES |
| Cycle Time | 15 ns |
| Height Seated (Max) | 1.6mm |
| Length | 14mm |
| Width | 14mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72V2113L15PF8 Overview
You can find FIFO memory chip in package TQFP .Surface Mount is memory IC's recommended mounting method.An input voltage of 3.3V results in high efficiency.As a result of this, FIFO means contains 80 terminations.The operation pins are 80 pins.The maximum current required for its operation is 35mA .Set the supply voltage to 3.3V to ensure FIFO's maximum efficiency.The FIFO products must be run at a minimum temperature of 0°C degrees Celsius to ensure reliability.An operating temperature of 70°C °C is necessary for stable operation.In FIFOs , this gadget is self-contained.In this part, the memory type is OTHER FIFO .FIFO may operate at very low supply voltages, such as 3.15V volts.A maximum supply voltage of 3.45V volts can be handled by the FIFO memory chip.As a result, it contains a total of 80 pins.When the frequency is set to 66.7MHz , the system can maintain good accuracy.The memory logic's maximum value is 66.7MHz for regular operation.
72V2113L15PF8 Features
FIFOs category
Frequency at most
72V2113L15PF8 Applications
There are a lot of Integrated Device Technology (IDT) 72V2113L15PF8 FIFOs Memory applications.
- Fabrication Site
- Desktop Computers
- Test site
- Portable Information Devices
- Address mapping
- Video time base correction
- Test Equipment
- SPI Bus Flash Memory Device
- Video Processing
- Analog-to-digital converters
