72V2113L6PF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 80 |
| Published | 2009 |
| Part Status | Active |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Frequency | 166MHz |
| Operating Supply Voltage | 3.3V |
| Max Supply Voltage | 3.45V |
| Min Supply Voltage | 3.15V |
| Element Configuration | Dual |
| Nominal Supply Current | 35mA |
| Max Supply Current | 35mA |
| Frequency (Max) | 166MHz |
| Access Time | 4 ns |
| Direction | Unidirectional |
| Density | 4.5 Mb |
| Sync/Async | Synchronous |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| FWFT Support | Yes |
| Programmable Flags Support | Yes |
| Length | 14mm |
| Width | 14mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72V2113L6PF Overview
FIFO memory chip can be found in the TQFP package.The recommended mounting way is Surface Mount .The operation pins are 80 pins.In order to operate FIFO design, a maximum current of 35mA is required.When the supply voltage is set to 3.3V , the FIFO's maximum efficiency is achieved.The FIFO products must be run at a minimum temperature of 0°C degrees Celsius to ensure reliability.An operating temperature of 70°C °C is necessary for stable operation.FIFO may operate at a very low supply voltage, such as 3.15V V.The memory logic's maximum supply voltage is 3.45V volts.It maintains good accuracy at a 166MHz frequency.During normal operation, the FIFO memory's maximum value is 166MHz .
72V2113L6PF Features
Frequency at most
72V2113L6PF Applications
There are a lot of Integrated Device Technology (IDT) 72V2113L6PF FIFOs Memory applications.
- A/D output buffers
- Cardiac Monitoring Device
- Networking
- Computer networks
- Extended product life cycle
- Portable Information Devices
- Digital buffering
- Battery Charger
- Video time base correction
- Network switching/routing
