72V2113L7-5BC
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Number of Pins | 100 |
| Packaging | Bulk |
| Published | 2009 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 100 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn63Pb37) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Frequency | 133.3MHz |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 100 |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 3.45V |
| Min Supply Voltage | 3.15V |
| Memory Size | 512kB |
| Element Configuration | Dual |
| Nominal Supply Current | 35mA |
| Max Supply Current | 35mA |
| Frequency (Max) | 133.3MHz |
| Access Time | 5 ns |
| Data Bus Width | 18b |
| Organization | 256KX18 |
| Density | 4.5 Mb |
| Standby Current-Max | 0.015A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| Output Enable | YES |
| Height Seated (Max) | 1.5mm |
| Length | 11mm |
| Width | 11mm |
| Thickness | 1.4mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72V2113L7-5BC Overview
There's a Bulk on the package.It is possible to store data and applications on the FIFO chips as they have 512kB in their memory.The recommended mounting way is Surface Mount .When the supply voltage is 3.3V , high efficiency is possible.I found that it has 100 terminations in FIFO means.FIFO design has 100 operation pins.In order to operate it, it requires 35mA volts of current.The supply voltage should be set to 3.3V in order to achieve FIFO's maximum efficiency.For reliability, FIFO works at a minimum temperature of 0°C degrees Celsius.The memory logic's maximum operating temperature is 70°C °C, which allows for stable operation.In FIFOs , this gadget is self-contained.In this part, the memory type is OTHER FIFO .If the supply voltage is very low, such as 3.15V V, FIFO may be able to operate.There is a maximum supply voltage of 3.45V volts that FIFO memory can handle.Approximately 100 pins are attached to it.A frequency of 133.3MHz is capable of maintaining good accuracy.A FIFO memory's maximum value of 133.3MHz can be used for regular operation.
72V2113L7-5BC Features
512kB memory size
FIFOs category
Frequency at most
72V2113L7-5BC Applications
There are a lot of Integrated Device Technology (IDT) 72V2113L7-5BC FIFOs Memory applications.
- Disk Controllers
- Cardiac Monitoring Device
- Routers
- Measurement Equipment
- Notebook
- High-speed disk
- Cameras
- GPS Offender Tracking
- Data communications
- Queues for communication systems
