72V211L10J
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | PLCC |
| Number of Pins | 32 |
| Published | 2008 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 32 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 1.27mm |
| Frequency | 100MHz |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 32 |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Element Configuration | Dual |
| Nominal Supply Current | 20mA |
| Max Supply Current | 20mA |
| Frequency (Max) | 100MHz |
| Access Time | 6.5 ns |
| Organization | 512X9 |
| Density | 4.5 kb |
| Standby Current-Max | 0.005A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 9b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| FWFT Support | No |
| Programmable Flags Support | Yes |
| Output Enable | YES |
| Cycle Time | 10 ns |
| Height Seated (Max) | 3.55mm |
| Length | 13.97mm |
| Width | 11.43mm |
| Thickness | 2.79mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72V211L10J Overview
You will find FIFO memory chip in the PLCC package.Mounting it Surface Mount is recommended.If the supply voltage is set to 3.3V , high efficiency can be achieved.In FIFO means, there are 32 terminations.In the case of the operation pins, they are 32 pins.FIFO design requires a maximum current of 20mA to operate.When the supply voltage is set to 3.3V , the FIFO's maximum efficiency is achieved.For reliability, FIFO works at a minimum temperature of 0°C degrees Celsius.Keeping the operating temperature at 70°C °C allows the FIFO products to operate continuously.A self-contained gadget is contained in FIFOs .In this part, the memory type is OTHER FIFO .If the supply voltage is very low, such as 3V V, FIFO may be able to operate.An input voltage of 3.6V V is the maximum that FIFO memory can handle.The FIFO memory IC has a total of 32 pins.In the presence of a 100MHz frequency, it can maintain good accuracy.For regular operation, the memory logic's maximum value is 100MHz .
72V211L10J Features
FIFOs category
Frequency at most
72V211L10J Applications
There are a lot of Integrated Device Technology (IDT) 72V211L10J FIFOs Memory applications.
- Code converters
- Cameras
- Data communications
- Smart Meter
- Computers
- Network switching/routing
- Extended product life cycle
- Telecommunication
- Game Consoles
- Character generators
