72V211L10J8
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | PLCC |
| Number of Pins | 32 |
| Published | 2008 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 32 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 1.27mm |
| Frequency | 100MHz |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 32 |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Element Configuration | Dual |
| Nominal Supply Current | 20mA |
| Max Supply Current | 20mA |
| Frequency (Max) | 100MHz |
| Access Time | 6.5 ns |
| Organization | 512X9 |
| Density | 4.5 kb |
| Standby Current-Max | 0.005A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 9b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| FWFT Support | No |
| Programmable Flags Support | Yes |
| Output Enable | YES |
| Cycle Time | 10 ns |
| Height Seated (Max) | 3.55mm |
| Length | 13.97mm |
| Width | 11.43mm |
| Thickness | 2.79mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72V211L10J8 Overview
The PLCC package contains FIFO memory chip.It is pointing in the direction of Surface Mount .A supply voltage of 3.3V is capable of producing high efficiency.FIFO means contains 32 terminations.FIFO design has 32 operation pins.In order for FIFO design to operate, FIFO design requires a maximum current of 20mA .A 3.3V supply voltage will ensure FIFO's maximum efficiency.FIFO operates at a minimum temperature of 0°C degrees Celsius to ensure reliabilFIFOy.Its maximum operating temperature of 70°C °C ensures stable operation.A self-contained gadget is contained in FIFOs .It has a type OTHER FIFO memory IC.Typically, FIFO would work at 3V volts, but it may also work at higher voltages.The memory logic's maximum supply voltage is 3.6V volts.It has a total of 32 pins on it.In the presence of a 100MHz frequency, it can maintain good accuracy.During regular operation, the FIFO memory's maximum value is 100MHz .
72V211L10J8 Features
FIFOs category
Frequency at most
72V211L10J8 Applications
There are a lot of Integrated Device Technology (IDT) 72V211L10J8 FIFOs Memory applications.
- High-speed graphics pixel buffer
- Firmware loaders
- Cardiac Monitoring Device
- Temporary storage elements
- MP3 Interface for Automobile
- Medical Monitoring Device
- Desktop Computers
- General Data Collection Applications at Extreme High-Temperatures
- Cameras
- Code converters
