72V211L10PF
| Parameters | |
|---|---|
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 32 |
| Published | 2008 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 32 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.8mm |
| Frequency | 100MHz |
| Pin Count | 32 |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Element Configuration | Dual |
| Nominal Supply Current | 20mA |
| Max Supply Current | 20mA |
| Frequency (Max) | 100MHz |
| Access Time | 6.5 ns |
| Organization | 512X9 |
| Density | 4.5 kb |
| Standby Current-Max | 0.005A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 9b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| FWFT Support | No |
| Programmable Flags Support | Yes |
| Output Enable | YES |
| Cycle Time | 10 ns |
| Height Seated (Max) | 1.6mm |
| Length | 7mm |
| Width | 7mm |
72V211L10PF Overview
The TQFP package contains FIFO memory chip.Mounting it in the Surface Mount way is recommended.When the supply voltage is 3.3V , high efficiency is possible.The number of terminations in FIFO means is 32 .As far as the operation pins are concerned, they are 32 pins.FIFO requires a minimum of 20mA current to operate.A supply voltage of 3.3V is recommended for FIFO's maximum efficiency.For reliability, FIFO works at a minimum temperature of 0°C degrees Celsius.The memory logic's maximum operating temperature is 70°C °C, which allows for stable operation.It is contained within FIFOs .This part is equipped with an IC of type OTHER FIFO memory.Low supply voltages, such as 3V V, may be required for operation.The memory logic's maximum supply voltage is 3.6V volts.Currently, it has 32 pins.With a frequency of 100MHz , it exhibits good accuracy.100MHz is the FIFO memory IC's maximum value for regular operation.
72V211L10PF Features
FIFOs category
Frequency at most
72V211L10PF Applications
There are a lot of Integrated Device Technology (IDT) 72V211L10PF FIFOs Memory applications.
- Cardiac Monitoring Device
- Signal processing
- Industrial Systems
- Temporary storage elements
- Network switching/routing
- Thermal Management for DDR3 Memory Modules
- Disk Controllers
- Data communications
- Multi-stage synchronizer
- General Data Collection Applications at Extreme High-Temperatures
