72V211L10PF8
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 32 |
| Packaging | Tape & Reel |
| Published | 2008 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 32 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.8mm |
| Frequency | 100MHz |
| Pin Count | 32 |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Element Configuration | Dual |
| Nominal Supply Current | 20mA |
| Max Supply Current | 20mA |
| Frequency (Max) | 100MHz |
| Access Time | 6.5 ns |
| Organization | 512X9 |
| Density | 4.5 kb |
| Standby Current-Max | 0.005A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 9b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| FWFT Support | No |
| Programmable Flags Support | Yes |
| Output Enable | YES |
| Cycle Time | 10 ns |
| Height Seated (Max) | 1.6mm |
| Length | 7mm |
| Width | 7mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72V211L10PF8 Overview
You will find FIFO memory chip in the TQFP package.In this case, it is packaged in case number Tape & Reel .The recommended mounting method for this FIFO products is Surface Mount .When the supply voltage is 3.3V , high efficiency is possible.A total of 32 terminations can be found in FIFO means.32 pins are used for operation.For its operation, 20mA is the maximum current required.When setting the supply voltage to 3.3V , you will achieve FIFO's maximum efficiency.In order to ensure reliability, FIFO is maintained at 0°C degrees Celsius at all times.Keeping the operating temperature at 70°C °C allows the FIFO products to operate continuously.In FIFOs , there is a self-contained gadget.It has a OTHER FIFO memory type IC.In some cases, FIFO operates at a very low supply voltage, such as 3V V.FIFO memory can handle a maximum supply voltage of 3.6V volts.It has a total of 32 pins on it.Despite a frequency of 100MHz , it is capable of maintaining good accuracy.During regular operation, 100MHz is the FIFO memory's maximum value.
72V211L10PF8 Features
FIFOs category
Frequency at most
72V211L10PF8 Applications
There are a lot of Integrated Device Technology (IDT) 72V211L10PF8 FIFOs Memory applications.
- Thermal Management for DDR3 Memory Modules
- Communications
- Network switching/routing
- GPS Offender Tracking
- Network bridges
- Telecommunication
- IP Camera Buffer
- SPI Bus Flash Memory Devices
- Digital buffering
- Optical memories
