72V211L10PFG
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 32 |
| Published | 2008 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 32 |
| ECCN Code | EAR99 |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.8mm |
| Frequency | 100MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 32 |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Element Configuration | Dual |
| Nominal Supply Current | 20mA |
| Max Supply Current | 20mA |
| Frequency (Max) | 100MHz |
| Access Time | 6.5 ns |
| Data Bus Width | 9b |
| Organization | 512X9 |
| Density | 4.5 kb |
| Standby Current-Max | 0.005A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 9b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Programmable Flags Support | Yes |
| Output Enable | YES |
| Cycle Time | 10 ns |
| Height Seated (Max) | 1.6mm |
| Length | 7mm |
| Width | 7mm |
| Thickness | 1.4mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
72V211L10PFG Overview
You can find FIFO memory chip in the TQFP package.Mounting it Surface Mount is recommended.When the supply voltage is 3.3V there is the possibility of high efficiency.A total of 32 terminations can be found in FIFO means.As far as the operation pins are concerned, they are 32 pins.There is a maximum current requirement of 20mA for its operation.In order to maximize efficiency, the supply voltage should be set to 3.3V .To ensure reliabilFIFOy, FIFO runs at a minimum working temperature of 0°C degrees Celsius.By using a memory logic's maximum operating temperature of 70°C degrees Celsius, stable operation can be achieved.A self-contained gadget is contained within FIFOs .It has a type OTHER FIFO memory IC.The FIFO memory chip may be operated at very low supply voltages, such as3V volts.A maximum supply voltage of 3.6V volts can be handled by the FIFO memory chip.There are a total of 32 pins on this board.Despite a frequency of 100MHz , it is capable of maintaining good accuracy.During normal operation, the FIFO memory's maximum value is 100MHz .
72V211L10PFG Features
FIFOs category
Frequency at most
72V211L10PFG Applications
There are a lot of Integrated Device Technology (IDT) 72V211L10PFG FIFOs Memory applications.
- Consumer Systems
- High-speed graphics pixel buffer
- Fabrication Site
- Down-Hole Energy Drilling
- Multimedia
- Queues for communication systems
- Code converters
- Multi-stage synchronizer
- IP Radio
- Game Consoles
