72V211L15J
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | PLCC |
| Number of Pins | 32 |
| Published | 2008 |
| Part Status | Active |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Frequency | 66.7MHz |
| Operating Supply Voltage | 3.3V |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Element Configuration | Dual |
| Nominal Supply Current | 20mA |
| Max Supply Current | 20mA |
| Frequency (Max) | 66.7MHz |
| Access Time | 10 ns |
| Density | 4.5 kb |
| Sync/Async | Synchronous |
| Word Size | 9b |
| Bus Directional | Unidirectional |
| FWFT Support | No |
| Programmable Flags Support | Yes |
| Length | 13.97mm |
| Width | 11.43mm |
| Thickness | 2.79mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72V211L15J Overview
FIFO memory chip is contained in the PLCC package.Mounting it in the Surface Mount way is recommended.32 pins are used for operation.FIFO design requires a maximum current of 20mA to operate.A 3.3V supply voltage will ensure FIFO's maximum efficiency.The FIFO products must be run at a minimum temperature of 0°C degrees Celsius to ensure reliability.The memory logic's maximum operating temperature is 70°C °C, which allows for stable operation.It is possible to operate the FIFO memory chip at very low supply voltages, such as 3V volts.FIFO memory can handle a maximum supply voltage of 3.6V volts.When the frequency is set to 66.7MHz it can maintain good accuracy.Normally, the FIFO memory's maximum value is 66.7MHz .
72V211L15J Features
Frequency at most
72V211L15J Applications
There are a lot of Integrated Device Technology (IDT) 72V211L15J FIFOs Memory applications.
- Measurement Equipment
- Communications
- PC peripheral
- Portable Information Devices
- Application that requires re-writable nonvolatile parameter memory
- Disk Controllers
- Data
- Routers
- SPI Bus Flash Memory Devices
- Network bridges
