72V211L15J8
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | PLCC |
| Number of Pins | 32 |
| Published | 2008 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 32 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 1.27mm |
| Frequency | 66.7MHz |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 32 |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Element Configuration | Dual |
| Nominal Supply Current | 20mA |
| Max Supply Current | 20mA |
| Frequency (Max) | 66.7MHz |
| Access Time | 10 ns |
| Organization | 512X9 |
| Density | 4.5 kb |
| Standby Current-Max | 0.005A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 9b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| FWFT Support | No |
| Programmable Flags Support | Yes |
| Output Enable | YES |
| Cycle Time | 15 ns |
| Height Seated (Max) | 3.55mm |
| Length | 13.97mm |
| Width | 11.43mm |
| Thickness | 2.79mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72V211L15J8 Overview
This package is included in PLCC .Mounting it in Surface Mount is recommended.When the supply voltage is 3.3V , high efficiency is possible.A total of 32 terminations can be found in FIFO means.These are the 32 pins for operation.Its maximum operating current is 20mA .For FIFO's maximum efficiency, the supply voltage should be set to 3.3V .It is designed to run at a minimum temperature of 0°C degrees Celsius to ensure reliability.Its maximum operating temperature of 70°C °C ensures stable operation.It is contained within FIFOs .ICs of type OTHER FIFO are used in the FIFO memory chip.Low supply voltages, such as 3V V, may be required for operation.FIFO memory is capable of handling a maximum supply voltage of 3.6V volts.It consists of a total of 32 pins.With a frequency of 66.7MHz , it exhibits good accuracy.The memory logic's maximum value is 66.7MHz for regular operation.
72V211L15J8 Features
FIFOs category
Frequency at most
72V211L15J8 Applications
There are a lot of Integrated Device Technology (IDT) 72V211L15J8 FIFOs Memory applications.
- Consumer
- Fabrication Site
- Application that requires re-writable nonvolatile parameter memory
- Data-acquisition systems
- PC peripheral
- Multimedia
- Data communications
- Microprogramming
- Wireless
- Data
