72V211L15JI
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | PLCC |
| Number of Pins | 32 |
| Published | 2005 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 32 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 1.27mm |
| Frequency | 66.7MHz |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 32 |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Element Configuration | Dual |
| Nominal Supply Current | 20mA |
| Max Supply Current | 20mA |
| Frequency (Max) | 66.7MHz |
| Access Time | 10 ns |
| Organization | 512X9 |
| Density | 4.5 kb |
| Standby Current-Max | 0.005A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 9b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| FWFT Support | No |
| Programmable Flags Support | Yes |
| Output Enable | YES |
| Cycle Time | 15 ns |
| Height Seated (Max) | 3.55mm |
| Length | 13.97mm |
| Width | 11.43mm |
| Thickness | 2.79mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72V211L15JI Overview
FIFO memory chip can be found in the PLCC package.Mounting it in the Surface Mount way is recommended.With a supply voltage of 3.3V volts, high efficiency is possible.As a result of this, FIFO means contains 32 terminations.There are 32 pins on the operation pins.For its operation, 20mA is the maximum current required.The supply voltage should be set to 3.3V in order to achieve FIFO's maximum efficiency.In order to ensure reliability, FIFO is maintained at -40°C degrees Celsius at all times.A memory logic's maximum operating temperature of 85°C degrees Celsius assures stable operation.This gadget is self-contained in?FIFOs .In this part, the memory type is OTHER FIFO .FIFO may operate at very low supply voltages, such as 3V volts.This FIFO memory chip can handle maximum supply voltages of 3.6V volts.There are a total of 32 pins on this FIFO memory IC.When the frequency is set to 66.7MHz , the system can maintain good accuracy.There is 66.7MHz FIFO memory IC's maximum value for regular operation.
72V211L15JI Features
FIFOs category
Frequency at most
72V211L15JI Applications
There are a lot of Integrated Device Technology (IDT) 72V211L15JI FIFOs Memory applications.
- TVs
- Character generators
- Application that requires re-writable nonvolatile parameter memory
- Transistors
- Computers
- SPD for DDR3 Memory Modules
- GPS Offender Tracking
- Video Processing
- Consumer Systems
- Battery Charger
