72V211L15JI8
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | PLCC |
| Number of Pins | 32 |
| Packaging | Tape & Reel |
| Published | 2008 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 32 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 1.27mm |
| Frequency | 66.7MHz |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 32 |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Element Configuration | Dual |
| Nominal Supply Current | 20mA |
| Max Supply Current | 20mA |
| Frequency (Max) | 66.7MHz |
| Access Time | 10 ns |
| Organization | 512X9 |
| Density | 4.5 kb |
| Standby Current-Max | 0.005A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 9b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| FWFT Support | No |
| Programmable Flags Support | Yes |
| Output Enable | YES |
| Cycle Time | 15 ns |
| Height Seated (Max) | 3.55mm |
| Length | 13.97mm |
| Width | 11.43mm |
| Thickness | 2.79mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72V211L15JI8 Overview
FIFO memory chip can be found in the PLCC package.It's packaged in the shape of a Tape & Reel .The recommended mounting way is Surface Mount .A supply voltage of 3.3V allows for high efficiency.I found that it has 32 terminations in FIFO means.There are 32 pins for operation.Its maximum operating current is 20mA .A voltage of 3.3V should be used for FIFO's maximum efficiency.The FIFO products must be run at a minimum temperature of -40°C degrees Celsius to ensure reliability.Keeping the operating temperature at 85°C °C allows the FIFO products to operate continuously.A self-contained gadget is contained within FIFOs .ICs of type OTHER FIFO are used in the FIFO memory chip.There is a possibility that FIFO may operate at a very low supply voltage, such as 3V V.This FIFO memory chip can handle maximum supply voltages of 3.6V volts.Approximately 32 pins are attached to it.In the presence of a 66.7MHz frequency, it can maintain good accuracy.During normal operation, the FIFO memory's maximum value is 66.7MHz .
72V211L15JI8 Features
FIFOs category
Frequency at most
72V211L15JI8 Applications
There are a lot of Integrated Device Technology (IDT) 72V211L15JI8 FIFOs Memory applications.
- Network switching/routing
- High-speed graphics pixel buffer
- Code converters
- Temporary storage elements
- IP Radio
- Portable Information Devices
- Controlled baseline
- IP Camera Buffer
- PC peripheral
- Routers
